PIC12C672-04/SM Microchip Technology, PIC12C672-04/SM Datasheet - Page 115

• Manufacturer Part Number: PIC12C672-04/SM
• Description: IC MCU OTP 2KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C672-04/SM

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• Controller Family/series: PIC12
• No. Of I/o's: 6
• Ram Memory Size: 128Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Digital Ic Case Style: SOIC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: XLT08SO-1 - SOCKET TRANSITION 8SOIC 150/208AC164312 - MODULE SKT FOR PM3 16SOICISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

7.2
1997 Microchip Technology Inc.
Control Register
bit 7:5
bit 4
bit 3
bit 2
bit 1
bit 0
Register 7-1: EECON1 Register
bit 7
Unimplemented: Read as '0'
EEIF: EEPROM Write Operation Interrupt Flag bit
1 = The write operation completed (must be cleared in software)
0 = The write operation is not complete or has not been started
WRERR: EEPROM Error Flag bit
1 = A write operation is prematurely terminated
0 = The write operation completed
WREN: EEPROM Write Enable bit
1 = Allows write cycles
0 = Inhibits write to the data EEPROM
WR: Write Control bit
1 = initiates a write cycle. The bit is cleared by hardware once write is complete.
0 = Write cycle to the data EEPROM is complete
RD: Read Control bit
1 = Initiates an EEPROM read. Read takes one cycle. RD is cleared in hardware.
0 = Does not initiate an EEPROM read
Legend
R = Readable bit
U = Unimplemented bit, read as ‘0’
Note 1: Future devices will have this bit in the PIR register.
U-0
The WR bit can only be set (not cleared) in software.
The RD bit can only be set (not cleared) in software.
(any MCLR reset or any WDT reset during normal operation)
—
U-0
—
W = Writable bit
U-0
Section 7. Data EEPROM
—
EEIF
R/W-1
(1)
S = Settable bit
- n = Value at POR reset
WRERR
R/W-1
WREN
R/W-x
R/S-0
WR
DS31007A-page 7-3
bit 0
R/S-x
RD
7