PIC24F16KA101-I/SS Microchip Technology, PIC24F16KA101-I/SS Datasheet - Page 4

• Manufacturer Part Number: PIC24F16KA101-I/SS
• Description: IC PIC MCU FLASH 16K 20-SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24F16KA101-I/SS

• Program Memory Type: FLASH
• Program Memory Size: 16KB (5.5K x 24)
• Package / Case: 20-SSOP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 18
• Eeprom Size: 512 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24F
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 1.5 KB
• Interface Type: I2C/IrDA/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 18
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 9-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MA240017 - MODULE PLUG-IN PIC24F16KA102 PIM
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24F16KA102 FAMILY
5. Module: Memory (Code Protection)
6. Module: Comparator
TABLE 3:
DS80473F-page 4
Param
No.
When any boot segment is enabled in program
memory (FBS<3:1> ≠ 111), it is not possible to
jump directly from the Reset vector to any
address in the boot segment.
Work around
Point the Reset vector to an address in the
general segment. From there, it is possible to
jump into the boot segment.
Affected Silicon Revisions
The maximum value for the input offset voltage
(specification
Table 29-13 of the Device Data Sheet, has
changed for this silicon revision. The new value
is shown in
Work around
None.
Affected Silicon Revisions
A5
A5
X
X
V
Symbol
IOFF
A6
A6
X
Table 3
COMPARATOR DC SPECIFICATIONS (PARTIAL)
A7
A7
Input Offset Voltage
X
D300,
(changes in bold).
B0
B0
X
Characteristics
V
IOFF
),
shown
in
Min
—
Typ
20
7. Module: SPI (Enhanced Buffer Mode)
In Enhanced Buffer mode (SPI1CON2<0> = 1),
polling the SPI Transmit Buffer Full bit, SPITBF
(SPI1STAT<1>), may produce erroneous results.
This occurs only under two circumstances:
a)
b)
For Master mode, this includes all combinations
of the primary prescale bits (SPI11CON1<1:0>)
and secondary prescale bits (SPI1CON1<4:2>)
that, when combined, create an SPI sample
clock divisor with a value of four or greater.
Work around
Instead of polling the SPITBF bit to test for an
empty buffer (SPI1STAT<1> = 0), implement a
SPI receive interrupt handler in software and
add to the SPI transmit buffer in this routine.
Alternatively, poll the SPI Receive Full bit,
SPIRBF (SPI1STAT<0>), or the Shift Register
Empty bit, SRMPT (SPI1STAT<7>), to determine
when to service the SPI transmit and transmit
buffers.
Affected Silicon Revisions
Max
60
A5
X
In Master mode, when the SPI divide clock
is 4 or greater.
In Slave mode, when the SPI sample clock
is slower than 1/4 of the CPU instruction
time (T
A6
Units
X
mV
CY
).
A7
X
 2010 Microchip Technology Inc.
B0
Comments