PIC12C671-04I/SM Microchip Technology, PIC12C671-04I/SM Datasheet - Page 148

• Manufacturer Part Number: PIC12C671-04I/SM
• Description: IC MCU OTP 1KX14 A/D 8-SOIJ
• Manufacturer: Microchip Technology
• Series: PIC® 12Cr

Specifications of PIC12C671-04I/SM

• Core Size: 8-Bit
• Program Memory Size: 1.75KB (1K x 14)
• Core Processor: PIC
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 5
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 8-SOIC (5.3mm Width), 8-SOP, 8-SOEIAJ
• Controller Family/series: PIC12
• No. Of I/o's: 6
• Ram Memory Size: 128Byte
• Cpu Speed: 4MHz
• No. Of Timers: 1
• Digital Ic Case Style: SOIC
• Processor Series: PIC12C
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 128 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 5
• Number Of Timers: 8
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8
• Package: 8SOIJ
• Device Core: PIC
• Family Name: PIC12
• Maximum Speed: 4 MHz
• Operating Supply Voltage: 3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164312 - MODULE SKT FOR PM3 16SOICISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMING309-1048 - ADAPTER 8-SOIC TO 8-DIP309-1047 - ADAPTER 8-SOIC TO 8-DIPAC124001 - MODULE SKT PROMATEII 8DIP/SOIC
• Eeprom Size: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

PICmicro MID-RANGE MCU FAMILY
9.4
DS31009A-page 9-8
Note 1: Port/Peripheral select signal selects between port data and peripheral output.
2: Peripheral OE (output enable) is only activated if peripheral select is active.
3: I/O pins have diode protection to V
Peripheral input
PORT/PERIPHERAL Select
Peripheral Data-out
Data Bus
Peripheral OE
PORTC and the TRISC Register
(2)
PORTC is an 8-bit bi-directional port. Each pin is individually configurable as an input or output
through the TRISC register. PORTC pins have Schmitt Trigger input buffers.
When enabling peripheral functions, care should be taken in defining TRIS bits for each PORTC
pin. Some peripherals override the TRIS bit to make a pin an output, while other peripherals over-
ride the TRIS bit to make a pin an input.
Example 9-3: Initializing PORTC
Figure 9-6: PORTC Block Diagram (Peripheral Output Override)
CLRF
CLRF
BSF
MOVLW
MOVWF
WR PORT
WR TRIS
(1)
RD PORT
RD TRIS
STATUS
PORTC
STATUS, RP0
0xCF
TRISC
TRIS Latch
Data Latch
D
D
CK
CK
DD
Q
Q
Q
Q
and V
; Bank0
; Initialize PORTC by clearing output
;
; Select Bank1
; Value used to initialize data direction
; PORTC<3:0> = inputs, PORTC<5:4> = outputs
;
SS
.
data latches
PORTC<7:6> = inputs
0
1
Q
EN
D
1997 Microchip Technology Inc.
V
V
P
N
SS
DD
RD PORT
Schmitt
Trigger
I/O pin