PIC16F84-04/P Microchip Technology, PIC16F84-04/P Datasheet - Page 311

• Manufacturer Part Number: PIC16F84-04/P
• Description: IC MCU FLASH 1KX14 EE 18DIP
• Manufacturer: Microchip Technology
• Series: PIC® 16Fr

Specifications of PIC16F84-04/P

• Program Memory Type: FLASH
• Program Memory Size: 1.75KB (1K x 14)
• Package / Case: 18-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 13
• Eeprom Size: 64 x 8
• Ram Size: 68 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 68 B
• Maximum Clock Frequency: 4 MHz
• Number Of Programmable I/os: 13
• Number Of Timers: 1
• Operating Supply Voltage: 2 V to 6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: ICE2000
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DVA16XP180 - ADAPTER DEVICE FOR MPLAB-ICEAC164010 - MODULE SKT PROMATEII DIP/SOIC
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

17.4.10.1 WCOL Status Flag
1997 Microchip Technology Inc.
If the user writes the SSPBUF when a Repeated Start sequence is in progress, then WCOL is
set and the contents of the buffer are unchanged (the write doesn’t occur).
Figure 17-22: Repeat Start Condition Waveform
Note:
Falling edge of ninth clock
SDA
SCL
Because queueing of events is not allowed, writing of the lower 5 bits of SSPCON2
is disabled until the Repeated Start condition is complete.
End of Xmit
Write to SSPCON2
occurs here.
SDA = 1,
SCL(no change)
Preliminary
T
SDA = 1,
SCL = 1
BRG
T
BRG
Section 17. MSSP
Sr = Repeated Start
T
BRG
At completion of start bit,
hardware clear RSEN bit
Set S (SSPSTAT<3>)
and set SSPIF
Write to SSPBUF occurs here.
T
BRG
1st Bit
T
BRG
DS31017A-page 17-35
17