DSPIC33FJ128GP802-E/SO Microchip Technology, DSPIC33FJ128GP802-E/SO Datasheet - Page 375

• Manufacturer Part Number: DSPIC33FJ128GP802-E/SO
• Description: IC DSPIC MCU/DSP 128K 28-SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ128GP802-E/SO

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: CAN, I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 10x10b/12b, D/A 4x16b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 28-SOIC (7.5mm Width)
• Core Frequency: 40MHz
• Core Supply Voltage: 3.3V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 128KB
• Supply Voltage Range: 3V To 3.6V
• Package: 28SOIC W
• Device Core: dsPIC
• Family Name: dSPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 10-chx10-bit|10-chx12-bit
• On-chip Dac: 2-chx16-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

31.0
This section provides an overview of dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, and dsPIC33FJ128GPX02/
X04 electrical characteristics for devices operating in an ambient temperature range of -40°C to +150°C.
The specifications between -40°C to +150°C are identical to those shown in
for operation between -40°C to +125°C, with the exception of the parameters listed in this section.
Parameters in this section begin with an H, which denotes High temperature. For example, parameter DC10 in
Section 30.0 “Electrical Characteristics”
Absolute maximum ratings for the dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, and dsPIC33FJ128GPX02/X04
high temperature devices are listed below. Exposure to these maximum rating conditions for extended periods can affect
device reliability. Functional operation of the device at these or any other conditions above the parameters indicated in
the operation listings of this specification is not implied.
Absolute Maximum Ratings
Ambient temperature under bias
Storage temperature .............................................................................................................................. -65°C to +160°C
Voltage on V
Voltage on any pin that is not 5V tolerant with respect to V
Voltage on any 5V tolerant pin with respect to V
Voltage on any 5V tolerant pin with respect to V
Voltage on V
Maximum current out of V
Maximum current into V
Maximum junction temperature............................................................................................................................. +155°C
Maximum output current sunk by any I/O pin
Maximum output current sourced by any I/O pin
Maximum current sunk by all ports combined ........................................................................................................10 mA
Maximum current sourced by all ports combined
© 2011 Microchip Technology Inc.
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, AND dsPIC33FJ128GPX02/X04
Note:
Note 1: Stresses above those listed under “Absolute Maximum Ratings” can cause permanent damage to the
2: Maximum allowable current is a function of device maximum power dissipation (see
3: Unlike devices at 125°C and below, the specifications in this section also apply to the CLKOUT, V
4: AEC-Q100 reliability testing for devices intended to operate at 150°C is 1,000 hours. Any design in which
5: Refer to the
HIGH TEMPERATURE ELECTRICAL CHARACTERISTICS
Programming of the Flash memory is not allowed above 125°C.
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods can affect device reliability.
V
the total operating time from 125°C to 150°C will be greater than 1,000 hours is not warranted without prior
written approval from Microchip Technology Inc.
DD
CAP
REF
with respect to V
with respect to V
-, SCLx, SDAx, PGCx, and PGDx pins.
DD
“Pin
SS
pin
pin .............................................................................................................................60 mA
(2)
Diagrams” section for 5V tolerant pins.
(4)
.............................................................................................................................60 mA
SS
SS
.........................................................................................................-40°C to +150°C
(1)
......................................................................................................... -0.3V to +4.0V
...................................................................................................... 2.25V to 2.75V
is the Industrial and Extended temperature equivalent of HDC10.
(3)
........................................................................................................1 mA
SS
SS
(3)
(2)
...................................................................................................1 mA
when V
when V
................................................................................................10 mA
SS
DD
DD
(5)
< 3.0V
≥ 3.0V
.................................................... -0.3V to (V
(5)
(5)
....................................... -0.3V to (V
.................................................... -0.3V to 5.6V
Section 30.0 “Electrical Characteristics”
Table
DS70292E-page 375
31-2).
DD
DD
+ 0.3V)
+ 0.3V)
REF
+,