PIC18F442-I/L Microchip Technology, PIC18F442-I/L Datasheet

IC MCU FLASH 8KX16 EE A/D 44PLCC

PIC18F442-I/L

Manufacturer Part Number
PIC18F442-I/L
Description
IC MCU FLASH 8KX16 EE A/D 44PLCC
Manufacturer
Microchip Technology
Series
PIC® 18Fr

Specifications of PIC18F442-I/L

Core Size
8-Bit
Program Memory Size
16KB (8K x 16)
Core Processor
PIC
Speed
40MHz
Connectivity
I²C, SPI, UART/USART
Peripherals
Brown-out Detect/Reset, LVD, POR, PWM, WDT
Number Of I /o
34
Program Memory Type
FLASH
Eeprom Size
256 x 8
Ram Size
768 x 8
Voltage - Supply (vcc/vdd)
4.2 V ~ 5.5 V
Data Converters
A/D 8x10b
Oscillator Type
External
Operating Temperature
-40°C ~ 85°C
Package / Case
44-PLCC
Controller Family/series
PIC18
No. Of I/o's
34
Eeprom Memory Size
256Byte
Ram Memory Size
768Byte
Cpu Speed
40MHz
No. Of Timers
4
Processor Series
PIC18F
Core
PIC
Data Bus Width
8 bit
Data Ram Size
768 B
Interface Type
MSSP, SPI, I2C, PSP, USART
Maximum Clock Frequency
40 MHz
Number Of Programmable I/os
34
Number Of Timers
1 x 16 bit
Operating Supply Voltage
2 V to 5.5 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
Development Tools By Supplier
PG164130, DV164035, DV244005, DV164005, PG164120, ICE2000, ICE4000, DM163022, DV164136
Minimum Operating Temperature
- 40 C
On-chip Adc
8
Package
44PLCC
Device Core
PIC
Family Name
PIC18
Maximum Speed
40 MHz
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
AC164309 - MODULE SKT FOR PM3 44PLCCXLT44L2 - SOCKET TRAN ICE 44PLCC444-1001 - DEMO BOARD FOR PICMICRO MCUDVA16XL441 - ADAPTER DEVICE ICE 44PLCCDV007003 - PROGRAMMER UNIVERSAL PROMATE II
Lead Free Status / Rohs Status
 Details
Other names
PIC18F442I/L

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
PIC18F442-I/L
Manufacturer:
Microchip Technology
Quantity:
10 000
The PIC18FXX2 Rev. C0 parts you have received
conform functionally to the Device Data Sheet
(DS39564B), except for the anomalies described
below.
All the issues listed here will be addressed in future
revisions of the PIC18FXX2 silicon.
The
PIC18FXX2 devices with these Device/Revision
IDs:
1. Module: Core (Program Memory Space)
© 2005 Microchip Technology Inc.
The Device IDs (DEVID1 and DEVID2) are located at
addresses
configuration space. They are shown in hexadecimal
in the format “DEVID2 DEVID1”.
Part Number
PIC18F242
PIC18F252
PIC18F442
PIC18F452
Performing table read operations above the user
program
1FFFFFh) may yield erroneous results at the
extreme low end of the device’s rated temperature
range (-40°C).
This applies specifically to addresses above
1FFFFFh,
(200000h-200007h),
(300000h-30000Dh) and the device ID locations
(3FFFFEh and 3FFFFFh). User program memory
is unaffected.
Work around
Three possible work arounds are presented. Other
solutions may exist.
1. Do not perform table read operations on areas
2. Insert NOP instructions (specifically, literal
Date Codes that pertain to this issue:
All engineering and production devices.
following
above the user memory space at -40°C.
FFFFh) around any table read instructions.
The suggested optimal number is 4 instruc-
tions before and 8 instructions after each table
read. This may vary depending upon the
particular application and should be optimized
by the user.
PIC18FXX2 Rev. C0 Silicon/Data Sheet Errata
3FFFFEh:3FFFFFh
memory
including
silicon
00 0100 100
00 0100 000
00 0100 101
00 0100 001
Device ID
space
the
errata apply
the
configuration
user
in
(addresses
Revision ID
the
ID
00111
00111
00111
00111
only
device’s
locations
bytes
over
to
2. Module: Data EEPROM
When reading the data EEPROM, the contents of
the EEDATA register may be corrupted if the RD
bit (EECON1<0>) is set immediately following a
write to the address byte (EEADR). The actual
contents of the data EEPROM remain unaffected.
Work around
Do not set EEADR immediately before the
execution of a read. Write to EEADR at least one
instruction cycle before setting the RD bit. The
instruction between the write to EEADR and the
read can be any valid instruction, including a NOP.
Date Codes that pertain to this issue:
All engineering and production devices.
PIC18FXX2
DS80173C-page 1

Related parts for PIC18F442-I/L

PIC18F442-I/L Summary of contents

Page 1

... PIC18FXX2 devices with these Device/Revision IDs: Part Number Device ID PIC18F242 00 0100 100 PIC18F252 00 0100 000 PIC18F442 00 0100 101 PIC18F452 00 0100 001 The Device IDs (DEVID1 and DEVID2) are located at addresses 3FFFFEh:3FFFFFh in configuration space. They are shown in hexadecimal in the format “DEVID2 DEVID1”. ...

Page 2

... Affected systems will repeatably fail normal testing. Systems not affected will continue to not be affected over time. Work around Insert a NOP instruction at address 0x0000. Date Codes that pertain to this issue: All engineering and production devices. © 2005 Microchip Technology Inc. ...

Page 3

... Receive data from communication channel (normal operation for the bootloader). • Identify address to be written. © 2005 Microchip Technology Inc. • If writing to an address within the same memory panel that you are executing from (0x0000 to 0x3FFF and 0x4000 to 0x7FFF), then jump to the opposite memory panel ...

Page 4

... The current through the resistor can be EXT /2R (mA) with R in kΩ. DD EXT EXT ≤ +85°C for industrial A ≤ +85°C for industrial A ≤ +125°C for extended A Conditions and DD SS © 2005 Microchip Technology Inc. ...

Page 5

... WDT, Timer1 Oscillator, BOR,...). 4: For RC osc configuration, current through R estimated by the formula © 2005 Microchip Technology Inc. Standard Operating Conditions (unless otherwise stated) -40°C ≤ T Operating temperature Standard Operating Conditions (unless otherwise stated) -40° ...

Page 6

... LVV = 1100 3.92 4.13 4.34 LVV = 1101 4.11 4.33 4.55 LVV = 1110 4.41 4.64 4.87 ≤ +85°C for industrial A -40°C ≤ T ≤ +125°C for extended A Units Conditions T ≥ 25° ≥ 25° ≥ 25° © 2005 Microchip Technology Inc. ...

Page 7

... Module: Packaging (Pinout and Product Identification) PIC18F442 and PICF452 devices are now offered in 44-pin, near chip scale micro lead frame pack- ages (commonly known as “QFN”). This packag- ing type has been added to the product line since the latest revision of the Device Data Sheet. ...

Page 8

... Digital I/O. Open-drain when configured as output Timer0 external clock input. 24 I/O TTL Digital I/O. I Analog Analog input SPI™ Slave Select input. I Analog Low-Voltage Detect input. (See the OSC2/CLKO/RA6 pin.) CMOS = CMOS compatible input or output I = Input P = Power ) DD Description © 2005 Microchip Technology Inc. ...

Page 9

... RB7 PGD Legend: TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels O = Output OD = Open-Drain (no P diode to V © 2005 Microchip Technology Inc. Pin Buffer Type Type PORTB is a bidirectional I/O port. PORTB can be software programmed for internal weak pull-ups on all inputs. ...

Page 10

... SPI Data Out. 44 I/O ST Digital I/O. O — USART Asynchronous Transmit. I/O ST USART Synchronous Clock (see related RX/DT I/O ST Digital I/ USART Asynchronous Receive. I/O ST USART Synchronous Data (see related TX/CK). CMOS = CMOS compatible input or output I = Input P = Power ) DD Description © 2005 Microchip Technology Inc. ...

Page 11

... Legend: TTL = TTL compatible input ST = Schmitt Trigger input with CMOS levels O = Output OD = Open-Drain (no P diode to V © 2005 Microchip Technology Inc. Pin Buffer Type Type PORTD is a bidirectional I/O port Parallel Slave Port (PSP) for interfacing to a microprocessor port. These pins have TTL input buffers when the PSP module is enabled ...

Page 12

... L .014 .016 .019 MILLIMETERS* MIN NOM MAX 44 0.65 BSC 1 0.80 0.90 1.00 0 0.02 0.05 0.25 REF 2 7.85 8.00 8.15 5.99 6.55 6.60 7.85 8.00 8.15 5.99 6.55 6.60 0.20 0.33 0.35 0.35 0.40 0.48 © 2005 Microchip Technology Inc. ...

Page 13

... Characteristics), 2 (Low-Voltage Detect Characteristics) and 3 (Packaging – Pinout and Product Identification). Rev B Document (05/2005) Added silicon issue 6 (Reset). Rev C Document (08/2005) Moved silicon issue 4 (MSSP) to MSSP module errata and added silicon issue 6 (Program Memory). © 2005 Microchip Technology Inc. PIC18FXX2 DS80173C-page 13 ...

Page 14

... PIC18FXX2 NOTES: DS80173C-page 14 © 2005 Microchip Technology Inc. ...

Page 15

... PowerMate, PowerTool, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel, Total Endurance and WiperLock are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

Page 16

... Fax: 886-3-572-6459 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 © 2005 Microchip Technology Inc. EUROPE Austria - Weis Tel: 43-7242-2244-399 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Tel: 33-1-69-53-63-20 ...

Related keywords