PIC24FJ256GB110-I/PF Microchip Technology, PIC24FJ256GB110-I/PF Datasheet - Page 122

• Manufacturer Part Number: PIC24FJ256GB110-I/PF
• Description: IC PIC MCU FLASH 256K 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256GB110-I/PF

• Program Memory Type: FLASH
• Program Memory Size: 256KB (85.5K x 24)
• Package / Case: 100-TQFP, 100-VQFP
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 83
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 84
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DM240011
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 16-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

PIC24FJ256GB110 FAMILY
8.1
The system clock source can be provided by one of
four sources:
• Primary Oscillator (POSC) on the OSCI and
• Secondary Oscillator (SOSC) on the SOSCI and
• Fast Internal RC (FRC) Oscillator
• Low-Power Internal RC (LPRC) Oscillator
The Primary Oscillator and FRC sources have the
option of using the internal USB PLL block, which
generates both the USB module clock and a separate
system clock from the 96 MHZ PLL. Refer to
Section 8.5 “Oscillator Modes and USB Operation”
for additional information.
The Fast Internal FRC provides an 8 MHz clock
source. It can optionally be reduced by the programma-
ble clock divider to provide a range of system clock
frequencies.
The selected clock source generates the processor and
peripheral clock sources. The processor clock source is
divided by two to produce the internal instruction cycle
clock, F
is also denoted by F
clock, F
some operating modes of the Primary Oscillator.
TABLE 8-1:
DS39897C-page 122
Fast RC Oscillator with Postscaler
(FRCDIV)
(Reserved)
Low-Power RC Oscillator (LPRC)
Secondary (Timer1) Oscillator
(SOSC)
Primary Oscillator (XT) with PLL
Module (XTPLL)
Primary Oscillator (EC) with PLL
Module (ECPLL)
Primary Oscillator (HS)
Primary Oscillator (XT)
Primary Oscillator (EC)
Fast RC Oscillator with PLL Module
(FRCPLL)
Fast RC Oscillator (FRC)
Note 1:
OSCO pins
SOSCO pins
2:
OSC
CY
CPU Clocking Scheme
. In this document, the instruction cycle clock
Oscillator Mode
/2, can be provided on the OSCO I/O pin for
OSCO pin function is determined by the OSCIOFCN Configuration bit.
This is the default oscillator mode for an unprogrammed (erased) device.
CONFIGURATION BIT VALUES FOR CLOCK SELECTION
OSC
/2. The internal instruction cycle
Oscillator Source
Secondary
Primary
Primary
Primary
Primary
Primary
Internal
Internal
Internal
Internal
Internal
Configuration bit settings. The oscillator Configuration
8.2
The oscillator source (and operating mode) that is used
at a device Power-on Reset event is selected using
bit settings are located in the Configuration registers in
the program memory (refer to Section 26.1 “Configu-
ration Bits” for further details). The Primary Oscillator
Configuration
Word 2<1:0>), and the Initial Oscillator Select Configu-
ration bits, FNOSC<2:0> (Configuration Word 2<10:8>),
select the oscillator source that is used at a Power-on
Reset. The FRC Primary Oscillator with Postscaler
(FRCDIV) is the default (unprogrammed) selection. The
Secondary Oscillator, or one of the internal oscillators,
may be chosen by programming these bit locations.
The Configuration bits allow users to choose between
the various clock modes, shown in Table 8-1.
8.2.1
The
Word 2<7:6>) are used to jointly configure device clock
switching and the Fail-Safe Clock Monitor (FSCM).
Clock switching is enabled only when FCKSM1 is
programmed (‘0’). The FSCM is enabled only when
FCKSM<1:0> are both programmed (‘00’).
POSCMD<1:0>
FCKSM
11
xx
11
11
01
00
10
01
00
11
11
Initial Configuration on POR
CLOCK SWITCHING MODE
CONFIGURATION BITS
bits,
Configuration
POSCMD<1:0>
 2009 Microchip Technology Inc.
FNOSC<2:0>
111
110
101
100
011
011
010
010
010
001
000
bits
(Configuration
(Configuration
Note
1, 2
1
1
1
1
1