HD64F3664FPV Renesas Electronics America, HD64F3664FPV Datasheet - Page 433

• Manufacturer Part Number: HD64F3664FPV
• Description: IC H8/3664 MCU FLASH 32K 64LQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of HD64F3664FPV

• Core Size: 16-Bit
• Program Memory Size: 32KB (32K x 8)
• Oscillator Type: External
• Core Processor: H8/300H
• Speed: 16MHz
• Connectivity: I²C, SCI
• Peripherals: PWM, WDT
• Number Of I /o: 29
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-LQFP
• No. Of I/o's: 29
• Ram Memory Size: 2KB
• Cpu Speed: 16MHz
• No. Of Timers: 4
• Digital Ic Case Style: LQFP
• Supply Voltage: RoHS Compliant
• Controller Family/series: H8/300H
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Item
Preface
Notes
Figure 5.3 Typical Connection to
Crystal Resonator
Figure 5.5 Typical Connection to
Ceramic Resonator
Figure 5.8 Typical Connection to
32.768-kHz Crystal Resonator
Main Revisions and Additions in this Edition
Page Revision (See Manual for Details)
vi, vii
78 to
80
Amended
When using the on-chip emulator (E7, E8) for H8/3664
program development and debugging, the following
restrictions must be noted (the on-chip debugging
emulator (E7) can also be used).
1. The NMI pin is reserved for the E7 or E8, and
2. Pins P85, P86, and P87 cannot be used. In order to
3. Area H'7000 to H'7FFF is used by the E7 or E8, and
4. Area H'F780 to H'FB7F must on no account be
5. When the E7 or E8 is used, address breaks can be
6. When the E7 or E8 is used, NMI is an input/output
Added
Note: Capacitances are reference values.
cannot be used.
use these pins, additional hardware must be
provided on the user board.
is not available to the user.
accessed.
set as either available to the user or for use by the
E7 or E8. If address breaks are set as being used
by the E7 or E8, the address break control registers
must not be accessed.
pin (open-drain in output mode), P85 and P87 are
input pins, and P86 is an output pin.
Rev. 6.00 Mar. 24, 2006 Page 403 of 412
REJ09B0142-0600