C8051F504-IM Silicon Laboratories Inc, C8051F504-IM Datasheet - Page 72

• Manufacturer Part Number: C8051F504-IM
• Description: IC 8051 MCU 32K FLASH 48-QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F50xr

Specifications of C8051F504-IM

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 48-QFN
• Mfg Application Notes: LIN Bootloader AppNote
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 50MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), CAN, LIN, SPI, UART/USART
• Peripherals: POR, PWM, Temp Sensor, WDT
• Number Of I /o: 40
• Ram Size: 4.25K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.25 V
• Data Converters: A/D 32x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: C8051F5x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 4.25 KB
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 40
• Number Of Timers: 4
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F500DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 32-ch x 12-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1527 - KIT DEV FOR C8051F50X
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1519-5

C8051F50x/F51x
7. Temperature Sensor
An on-chip temperature sensor is included on the C8051F50x/F51x devices which can be directly
accessed via the ADC multiplexer in single-ended configuration. To use the ADC to measure the tempera-
ture sensor, the ADC multiplexer channel should be configured to connect to the temperature sensor. The
temperature sensor transfer function is shown in Figure 7.1. The output voltage (V
ADC input is selected by bits AD0MX[4:0] in register ADC0MX. The TEMPE bit in register REF0CN
enables/disables the temperature sensor, as described in SFR Definition 8.1. While disabled, the tempera-
ture sensor defaults to a high impedance state and any ADC measurements performed on the sensor will
result in meaningless data. Refer to Table 5.10 for the slope and offset parameters of the temperature sen-
sor.
72
Figure 7.1. Temperature Sensor Transfer Function
V
Temp
TEMP
C
=
= (V
(Slope
TEMP
x Temp
- Offset) /
Temperature
Rev. 1.2
C
) +
Offset
Slope
Offset
(V at 0 Celsius)
Slope
(V / deg C)
TEMP
) is the positive