AT32UC3L016-ZAUT Atmel, AT32UC3L016-ZAUT Datasheet - Page 635

• Manufacturer Part Number: AT32UC3L016-ZAUT
• Description: IC MCU AVR32 16KB FLASH 48VQFN
• Manufacturer: Atmel
• Series: AVR®32 UC3r

Specifications of AT32UC3L016-ZAUT

• Core Processor: AVR
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 1.62 V ~ 3.6 V
• Data Converters: A/D 9x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-VQFN Exposed Pad, 48-HVQFN, 48-SQFN, 48-DHVQFN
• Processor Series: AT32UC3x
• Core: AVR32
• Data Bus Width: 32 bit
• Data Ram Size: 8 KB
• Interface Type: SPI, TWI, USART
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 7
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR32, EWAVR32-BL
• Development Tools By Supplier: AT32UC3L-EK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 9 Channel
• Length: 7 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 1.62 V
• Width: 7 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

27. Analog Comparator Interface (ACIFB)
27.1
27.2
32099F–11/2010
Features
Overview
Rev: 2.0.2.2
•
•
•
•
•
•
The Analog Comparator Interface (ACIFB) is able to control a number of Analog Comparators
(AC) with identical behavior. An Analog Comparator compares two voltages and gives a com-
pare output depending on this comparison.
The ACIFB can be configured in normal mode using each comparator independently or in win-
dow mode using defined comparator pairs to observe a window.
The number of channels implemented is device specific. Refer to the Module Configuration sec-
tion at the end of this chapter for details.
Controls an array of Analog Comparators
Low power option
Selectable settings for filter option
Window Mode
Interrupt
Can generate events to the peripheral event system
– Single shot mode support
– Filter length and hysteresis
– Detect inside/outside window
– Detect above/below window
– On comparator result rising edge, falling edge, toggle
– Inside window, outside window, toggle
– When startup time has passed
AT32UC3L016/32/64
635