DSPIC33FJ64GS406T-I/PT Microchip Technology, DSPIC33FJ64GS406T-I/PT Datasheet - Page 229

• Manufacturer Part Number: DSPIC33FJ64GS406T-I/PT
• Description: MCU/DSP 16BIT 64KB FLASH 64TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64GS406T-I/PT

• Program Memory Type: FLASH
• Program Memory Size: 64KB (64K x 8)
• Package / Case: 64-TFQFP
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SCI, SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, QEI, POR, PWM, WDT
• Number Of I /o: 58
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Product: DSCs
• Data Bus Width: 16 bit
• Processor Series: DSPIC33F
• Core: dsPIC
• Numeric And Arithmetic Format: Fixed-Point or Floating-Point
• Instruction Set Architecture: Harvard
• Device Million Instructions Per Second: 40 MIPs
• Maximum Clock Frequency: 120 MHz
• Number Of Programmable I/os: 58
• Data Ram Size: 4 KB
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240001, DV164033
• Interface Type: I2C, SPI, UART
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 16-1:
 2010 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10
bit 9
bit 8
bit 7
bit 6-4
SYNCEN
dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610
Note 1: These bits should be changed only when PTEN = 0. In addition, when using the SYNCIx feature, the user
R/W-0
R/W-0
PTEN
(1)
application must program the period register with a value that is slightly larger than the expected period of
the external synchronization input signal.
PTEN: PWM Module Enable bit
1 = PWM module is enabled
0 = PWM module is disabled
Unimplemented: Read as ‘0’
PTSIDL: PWM Time Base Stop in Idle Mode bit
1 = PWM time base halts in CPU Idle mode
0 = PWM time base runs in CPU Idle mode
SESTAT: Special Event Interrupt Status bit
1 = Special Event Interrupt is pending
0 = Special Event Interrupt is not pending
SEIEN: Special Event Interrupt Enable bit
1 = Special Event Interrupt is enabled
0 = Special Event Interrupt is disabled
EIPU: Enable Immediate Period Updates bit
1 = Active Period register is updated immediately
0 = Active Period register updates occur on PWM cycle boundaries
SYNCPOL: Synchronize Input and Output Polarity bit
1 = SYNCIx/SYNCO1 polarity is inverted (active-low)
0 = SYNCIx/SYNCO1 is active-high
SYNCOEN: Primary Time Base Sync Enable bit
1 = SYNCO1 output is enabled
0 = SYNCO1 output is disabled
SYNCEN: External Time Base Synchronization Enable bit
1 = External synchronization of primary time base is enabled
0 = External synchronization of primary time base is disabled
SYNCSRC<2:0>: Synchronous Source Selection bits
000 = SYNCI1
001 = SYNCI2
010 = SYNCI3
011 = SYNCI4
100 = Reserved
101 = Reserved
111 = Reserved
R/W-0
U-0
—
PTCON: PWM TIME BASE CONTROL REGISTER
SYNCSRC<2:0>
HC = Cleared in Hardware HS = Set in Hardware
W = Writable bit
‘1’ = Bit is set
PTSIDL
R/W-0
R/W-0
(1)
HS/HC-0
SESTAT
R/W-0
Preliminary
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
(1)
SEIEN
R/W-0
R/W-0
(1)
(1)
(1)
(1)
EIPU
R/W-0
R/W-0
SEVTPS<3:0>
(1)
SYNCPOL
x = Bit is unknown
R/W-0
R/W-0
(1)
DS70591C-page 229
(1)
SYNCOEN
R/W-0
R/W-0
bit 8
bit 0
(1)