PIC24FJ32GA102-I/SO Microchip Technology, PIC24FJ32GA102-I/SO Datasheet - Page 243

• Manufacturer Part Number: PIC24FJ32GA102-I/SO
• Description: IC MCU 16BIT 32KB FLASH 28SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 24Fr

Specifications of PIC24FJ32GA102-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 32KB (11K x 24)
• Package / Case: 28-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 16-Bit
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 21
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 10x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 8 KB
• Interface Type: I2C/IrDA/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 21
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001, MA240020, DM240002, DM240011, DV164033
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 25-3:
 2010 Microchip Technology Inc.
bit 23
bit 15
bit 7
Legend:
R = Readable bit
-n = Value when device is unprogrammed
bit 23-16
bit 15
bit 14
bit 13
bit 12
bit 11-10
bit 9-8
bit 7-6
bit 5-0
Note 1:
WPEND
R/PO-1
U-1
U-1
—
—
Digital functions on the SOSCI and SOSCO pins are only available when configured in Digital I/O mode
(‘00’).
Unimplemented: Read as ‘1’
WPEND: Segment Write Protection End Page Select bit
1 = Protected code segment lower boundary is at the bottom of program memory (000000h); upper
0 = Protected code segment upper boundary is at the last page of program memory; lower boundary
WPCFG: Configuration Word Code Page Protection Select bit
1 = Last page (at the top of program memory) and Flash Configuration Words are not protected
0 = Last page and Flash Configuration Words are code-protected
WPDIS: Segment Write Protection Disable bit
1 = Segmented code protection is disabled
0 = Segmented code protection is enabled; protected segment defined by WPEND, WPCFG and
Unimplemented: Read as ‘1’
WUTSEL<1:0>: Voltage Regulator Standby Mode Wake-up Time Select bits
11 = Default regulator start-up time used
01 = Fast regulator start-up time used
x0 = Reserved; do not use
SOSCSEL<1:0>: Secondary Oscillator Power Mode Select bits
11 = SOSC pins are in default (high drive strength) oscillator mode
01 = SOSC pins are in Low-Power (low drive strength) Oscillator mode
00 = SOSC pins have digital I/O functions (RA4, RB4); SCLKI can be used
10 = Reserved
Unimplemented: Read as ‘1’
WPFP5:WPFP0: Protected Code Segment Boundary Page bits
Designates the 512 instruction page that is the boundary of the protected code segment, starting with
Page 9 at the bottom of program memory.
If WPEND = 1:
Last address of designated code page is the upper boundary of the segment.
If WPEND = 0:
First address of designated code page is the lower boundary of the segment.
WPCFG
R/PO-1
boundary is the code page specified by WPFP<8:0>
is the code page specified by WPFP<8:0>
WPFPx Configuration bits
U-1
U-1
—
—
CW3: FLASH CONFIGURATION WORD 3
PO = Program Once bit
WPFP5
R/PO-1
R/PO-1
WPDIS
U-1
—
WPFP4
R/PO-1
U-1
U-1
—
—
PIC24FJ64GA104 FAMILY
U = Unimplemented bit, read as ‘0’
‘1’ = Bit is set
WUTSEL1
WPFP3
R/PO-1
R/PO-1
U-1
—
WUTSEL0
WPFP2
R/PO-1
R/PO-1
U-1
—
(1)
‘0’ = Bit is cleared
SOSCSEL1
R/PO-1
R/PO-1
WPFP1
U-1
—
(1)
DS39951C-page 243
SOSCSEL0
WPFP0
R/PO-1
R/PO-1
U-1
—
bit 16
bit 8
bit 0
(1)