PIC18F67K22-I/MRRSL Microchip Technology, PIC18F67K22-I/MRRSL Datasheet - Page 2

• Manufacturer Part Number: PIC18F67K22-I/MRRSL
• Description: MCU PIC 128K FLASH XLP 64QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F67K22-I/MRRSL

• Core Size: 8-Bit
• Program Memory Size: 128KB (64K x 16)
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 16x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Controller Family/series: PIC18
• Eeprom Memory Size: 1024Byte
• Ram Memory Size: 3862Byte
• Cpu Speed: 16MIPS
• No. Of Timers: 11
• Processor Series: PIC18F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 4 KB
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 11
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: DM180021, DM183026-2, DM183032, DV164131, MA180028
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F87K22 FAMILY
TABLE 2:
DS80507B-page 2
Analog-to-
Digital
Converter
Ports
High/Low-
Voltage
Detect
ECCP
EUSART
I
Note 1:
PD
Module
I
DD
Only those issues indicated in the last column apply to the current silicon revision.
A/D Offset
Leakage
HLVD Trip
Auto-Shutdown
Synchronous
Transmit
Maximum Limit
SILICON ISSUE SUMMARY
Feature
Number
Item
1.
2.
3.
4.
5.
6.
The A/D offset is greater than specified
in the data sheet’s A/D Converter
Characteristics table.
I/O port leakage is higher than the D060
spec in the data sheet.
The high-to-low (VDIRMAG = 0) setting
of the HLVD may send initial interrupts.
The tri-state setting of the auto-shut-
down feature in the enhanced PWM
may not successfully drive the pin to
tri-state.
When using the Synchronous Transmit
mode of the EUSART, at high baud
rates, transmitted data may become
corrupted.
Maximum current limits may be higher
than specified in Table 31-2 of the data
sheet.
Issue Summary
 2010 Microchip Technology Inc.
A3
X
X
X
X
X
X
Affected Revisions
(1)