IC PIC MCU FLASH 32KX16 100TQFP

PIC24HJ64GP510-E/PT

Manufacturer Part NumberPIC24HJ64GP510-E/PT
DescriptionIC PIC MCU FLASH 32KX16 100TQFP
ManufacturerMicrochip Technology
SeriesPIC® 24H
PIC24HJ64GP510-E/PT datasheets
 


Specifications of PIC24HJ64GP510-E/PT

Core ProcessorPICCore Size16-Bit
Speed40 MIPsConnectivityCAN, I²C, IrDA, LIN, SPI, UART/USART
PeripheralsBrown-out Detect/Reset, DMA, POR, PWM, WDTNumber Of I /o85
Program Memory Size64KB (22K x 24)Program Memory TypeFLASH
Ram Size8K x 8Voltage - Supply (vcc/vdd)3 V ~ 3.6 V
Data ConvertersA/D 32x10b/12bOscillator TypeInternal
Operating Temperature-40°C ~ 125°CPackage / Case100-TFQFP
For Use WithAC164333 - MODULE SKT FOR PM3 100QFPDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32Lead Free Status / RoHS StatusLead free / RoHS Compliant
Eeprom Size-  
1
Page 1
2
Page 2
3
Page 3
4
Page 4
5
Page 5
6
Page 6
7
Page 7
8
Page 8
Page 1/8

Download datasheet (183Kb)Embed
Next
PIC24H Engineering Samples Rev. A0/A1 Silicon Errata
PIC24HJXXXGPXXX,
(Rev. A0/A1) Silicon Errata
The PIC24H Engineering Samples (Rev. A0/A1) you
received were found to conform to the specifications
and functionality described in the following documents:
• DS70175 – “PIC24H Family Data Sheet”
• DS70157 – “dsPIC30F/33F Programmer’s
Reference Manual”
• DS70046 – “dsPIC30F Family Reference Manual”
The exceptions to the specifications in the documents
listed above are described in this section. The specific
devices for which these exceptions are described are
listed below:
• PIC24HJ128GP506-PT ES
• PIC24HJ256GP206-PT ES
• PIC24HJ256GP610-PF ES
• PIC24HJ256GP610-PT ES
PIC24H Rev. A0/A1 silicon is identified by performing a
“Reset and Connect” operation to the device using
®
MPLAB
ICD 2 with MPLAB IDE v7.31.01 or later. The
output window will show either:
1. A successful connection to the device
specified in Configure>Select Device
2. Warning
message
ICD
Invalid target device id. If this mes-
sage is received, consult the “dsPIC33F Flash
Programming Specification” (DS70152) to ver-
ify the device ID. This document contains
device IDs for both the dsPIC33F and PIC24H
devices. This device mismatch will be fixed in
future revisions of MPLAB IDE.
The errata described in this section will be addressed
in future revisions of silicon.
© 2006 Microchip Technology Inc.
PIC24HJXXXGPXXX
Silicon Errata Summary
The following list summarizes the errata described in
further detail through the remainder of this document:
1.
SPI with 1:1 Prescaler
The SPI modules do not function correctly when
the SPI clock prescale ratio is set to 1:1.
2.
SPI Master Reception for Bit Rates above
8 Mbps
SPI Master reception does not function correctly at
bit rates higher than 8 Mbps, if the data is sampled
at the middle of the serial clock period.
3.
ADC with Sample/Hold CH3
Sample/Hold amplifier CH3 does not function
correctly for the Analog-to-Digital Converter
modules.
4.
LATC and LATD Reads
The LATC and LATD register reads do not
function.
5.
DMA Single-Shot Mode
The Direct Memory Access Single-Shot mode
does not function correctly.
6.
Windowed Watchdog Timer
Warn0020:
When the Windowed WDT option is enabled and
the WDT is disabled, a WDT time out will occur.
7.
Timer3 as A/D Conversion Trigger Source
Timer2 and Timer3, when configured as a single
32-bit timer, may not initiate an A/D conversion if
the PR3 register is set to ‘0’ and Timer3 is selected
as the A/D conversion trigger source.
8.
UART Auto-Baud
The UART FIFO will be loaded with incorrect data
if the UxBRG register is not initialized to a specific
value.
9.
Doze Mode
When Doze mode is enabled, any writes to a
peripheral SFR can cause other updates to that
register to cease to function for the duration of the
current CPU clock cycle.
DS80260B-page 1

PIC24HJ64GP510-E/PT Summary of contents

  • Page 1

    ... This device mismatch will be fixed in future revisions of MPLAB IDE. The errata described in this section will be addressed in future revisions of silicon. © 2006 Microchip Technology Inc. PIC24HJXXXGPXXX Silicon Errata Summary The following list summarizes the errata described in further detail through the remainder of this document: 1 ...

  • Page 2

    ... I C™ Module 2 The I C module does not wake-up from Sleep when it detects bus activity. The following sections will describe the errata and work around to these errata, where they may apply. © 2006 Microchip Technology Inc. ...

  • Page 3

    ... Do not use the Sample/Hold amplifier CH3 with the ADC1 or ADC2 module. You may use CH0, CH1 and CH2. © 2006 Microchip Technology Inc. 4. Module: LATC and LATD Reads The LATC and LATD register reads do not func- tion. Performing a read or read-modify-write oper- ...

  • Page 4

    ... Module: 10-bit ADC The ADC module INL is >±2 LSBs and DNL is >±1 LSB. Work around None. Future versions of the silicon will support <±2 LSBs INL and <±1 LSB DNL specifications, and signal acquisition time. © 2006 Microchip Technology Inc. ...

  • Page 5

    ... DISI instruction. Alter- natively, make sure that subsequent DISI instructions are called before the DISI counter decrements to zero. © 2006 Microchip Technology Inc. 14. Module: JTAG Programming JTAG programming does not work in silicon revision A0/A1. Work around None ...

  • Page 6

    ... Timer, 7 (Timer3 as A/D Conversion Trigger Source), 8 (UART Auto-Baud), 9 (Doze Mode), 10 (12-bit ADC), 11 (10-bit ADC), 12 (DMA Module: Interaction with EXCH Instruction), 13 (DISI Instruction), 14 (JTAG Programming), 15 (Internal FRC Oscillator), 16 (ECAN Loopback Mode), 17 (Clock Switch from Fail-Safe Clock Source) and Module). DS80260B-page 6 © 2006 Microchip Technology Inc. ...

  • Page 7

    ... PowerMate, PowerTool, REAL ICE, rfLAB, rfPICDEM, Select Mode, Smart Serial, SmartTel, Total Endurance, UNI/O, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. ...

  • Page 8

    ... Fax: 886-3-572-6459 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-536-4803 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 © 2006 Microchip Technology Inc. EUROPE Austria - Wels Tel: 43-7242-2244-399 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 France - Paris Tel: 33-1-69-53-63-20 ...