AT89C51CC03UA-RLTUM Atmel, AT89C51CC03UA-RLTUM Datasheet - Page 144

• Manufacturer Part Number: AT89C51CC03UA-RLTUM
• Description: IC 8051 MCU 64K FLASH 44-VQFP
• Manufacturer: Atmel
• Series: AT89C CANr

Specifications of AT89C51CC03UA-RLTUM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: CAN, UART/USART
• Peripherals: POR, PWM, WDT
• Number Of I /o: 36
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Package: 44VQFP
• Device Core: 8051
• Family Name: 89C
• Maximum Speed: 60 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 36
• Interface Type: CAN/SPI/UART
• On-chip Adc: 8-chx10-bit
• Number Of Timers: 3
• Processor Series: AT89x
• Core: 8051
• Data Ram Size: 2304 B
• Maximum Clock Frequency: 60 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Minimum Operating Temperature: - 40 C
• Cpu Family: AT89
• Device Core Size: 8b
• Frequency (max): 60MHz
• Total Internal Ram Size: 2.25KB
• # I/os (max): 36
• Number Of Timers - General Purpose: 3
• Operating Supply Voltage (typ): 5V
• Operating Supply Voltage (max): 5.5V
• Operating Supply Voltage (min): 4.5V
• Instruction Set Architecture: CISC
• Operating Temp Range: -40C to 85C
• Operating Temperature Classification: Industrial
• Mounting: Surface Mount
• Pin Count: 44
• Package Type: VQFP
• For Use With: AT89OCD-01 - USB EMULATOR FOR AT8XC51 MCU
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Figure 69. PCA Capture Mode
16-bit Software Timer
Mode
Figure 70. PCA 16-bit Software Timer and High Speed Output Mode
144
Write to
CCAPnL
Write to CCAPnH
Reset
AT89C51CC03
CEXn
n = 0, 4
“0”
“1”
PCA Counter
(8 bits)
CH
(8 bits)
CL
The PCA modules can be used as software timers by setting both the ECOM and MAT
bits in the modules CCAPMn register. The PCA timer will be compared to the module’s
capture registers and when a match occurs an interrupt will occur if the CCFn (CCON
SFR) and the ECCFn (CCAPMn SFR) bits for the module are both set.
CAPMn
7
CAPMn
ECOMn CAPPn
Enable
7
Compare/Capture Module
CCAPnH
(8 bits)
ECOMn
16-Bit Comparator
0
CCAPMn Register (n = 0, 4)
CAPPn
CCAPnL
(8 bits)
CAPNn
For software Timer mode, set ECOMn and MATn.
For high speed output mode, set ECOMn, MATn and TOGn.
CAPNn
CCAPMn Register
Match
MATn
(n = 0, 4)
MATn
CCON
CCFn
TOGn PWMn ECCFn
TOGn
CCFn
CCON reg
CCAPnH CCAPnL
Toggle
PWMn ECCFn
(8bits)
PCA Counter
CH
0
(8bits)
CL
4182O–CAN–09/08
PCA
Interrupt
Request
CEXn
PCA
Interrupt
Request