MCP6022-E/SN Microchip Technology, MCP6022-E/SN Datasheet - Page 15

• Manufacturer Part Number: MCP6022-E/SN
• Description: IC OPAMP DUAL 2.5V 10MHZ 8SOIC
• Manufacturer: Microchip Technology

Specifications of MCP6022-E/SN

• Slew Rate: 7 V/µs
• Package / Case: 8-SOIC (3.9mm Width)
• Amplifier Type: General Purpose
• Number Of Circuits: 2
• Output Type: Rail-to-Rail
• Gain Bandwidth Product: 10MHz
• Current - Input Bias: 1pA
• Voltage - Input Offset: 500µV
• Current - Supply: 1mA
• Current - Output / Channel: 30mA
• Voltage - Supply, Single/dual (±): 2.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Number Of Channels: 2
• Common Mode Rejection Ratio (min): 70 dB
• Input Offset Voltage: 0.25 mV
• Input Bias Current (max): 5000 pA
• Operating Supply Voltage: 3 V, 5 V
• Supply Current: 2.7 mA
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Shutdown: No
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 2.5 V
• Technology: CMOS
• Voltage Gain Db: 110 dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

4.0
Microchip provides the basic design tools needed for
the MCP6021/2/3/4 family of op amps.
4.1
The latest SPICE macro model for the MCP6021/2/3/4
op
(www.microchip.com). This model is intended as an
initial design tool that works well in the op amp’s linear
region of operation at room temperature. See the
model file for information on its capabilities.
Bench testing is a very important part of any design and
cannot be replaced with simulations. Also, simulation
results using this macro model need to be validated by
comparing them to the data sheet specs and plots.
4.2
The FilterLab
simplifies analog active filter (using op amps) design.
Available at no cost from our web site (at www.micro-
chip.com), the FilterLab software active filter design
tool provides full schematic diagrams of the filter circuit
with component values. It also outputs the filter circuit
in SPICE format, which can be used with the Macro
Model to simulate actual filter performance.
2003 Microchip Technology Inc.
amps
DESIGN TOOLS
SPICE Macro Model
FilterLab
®
is
software is an innovative tool that
available
®
Software
on
our
web
site
MCP6021/2/3/4
DS21685B-page 15