NJM2370R37-TE1 NJR, NJM2370R37-TE1 Datasheet - Page 3
NJM2370R37-TE1
Manufacturer Part Number
NJM2370R37-TE1
Description
IC LDO REG W/ON-OFF 3.7V 8-VSP
Manufacturer
NJR
Datasheet
1.NJM2370R02-TE1.pdf
(7 pages)
Specifications of NJM2370R37-TE1
Regulator Topology
Positive Fixed
Voltage - Output
3.7V
Voltage - Input
Up to 20V
Voltage - Dropout (typical)
0.1V @ 30mA
Number Of Regulators
1
Current - Output
180mA
Operating Temperature
-40°C ~ 85°C
Mounting Type
Surface Mount
Package / Case
8-VSP
Number Of Outputs
1
Polarity
Positive
Input Voltage Max
20 V
Output Voltage
3.7 V
Output Type
Fixed
Dropout Voltage (max)
0.3 V
Output Current
150 mA
Line Regulation
0.12 % / V
Load Regulation
0.03 % / mA
Voltage Regulation Accuracy
3 %
Maximum Power Dissipation
0.32 W
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
Minimum Operating Temperature
- 40 C
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Current - Limit (min)
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
NJM2370R37-TE1
NJM2370R37-TE1TR
NJM2370R37-TE1TR
■ TYPICAL APPLICATION
Please refer to a figure of Output Voltage vs. Control Voltage.
*Noise bypass Capacitance Cp
determine the value.
Ver.2008-01-11
(1) In Nonuse of ON / OFF Control
Connect control terminal (1Pin) to V
When a resistance “R” is connected, the quiescent current decreases, but minimum operating voltage increases.
(2) In Use of ON / OFF CONTROL
When the control terminal is “H”, it is ON.
When the control terminal is “L” or “open”, it is OFF.
Noise bypass capacitance CP reduces noise generated by band-gap reference circuit.
Noise level and ripple rejection will be improved when larger CP is used. Please refer to the typical characteristics to
Use of smaller CP value may induce oscillation.
Please make sure to use CP value of greater than 0.1uF to avoid the problem.
IN
terminal (5Pin)
- 3 -