RR0816P-164-B-T5 Susumu, RR0816P-164-B-T5 Datasheet - Page 8

• Manufacturer Part Number: RR0816P-164-B-T5
• Description: RES 160K OHM 1/16W .1% 0603 SMD
• Manufacturer: Susumu
• Series: RRr

Specifications of RR0816P-164-B-T5

• Resistance (ohms): 160K
• Power (watts): 0.063W, 1/16W
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Tolerance: ±0.1%
• Size / Dimension: 0.063" L x 0.031" W (1.60mm x 0.80mm)
• Height: 0.016" (0.40mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 0603 (1608 Metric)
• Resistance In Ohms: 160K
• Case: 0603 (1608 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: RR08P160KBTR

TITLE:
6.2.5 Solvent resistance
6.3 Endurance
6.3.1 Rapid change of temperature
6.3.2 Endurance (Damp heat with load)
Method;
Specification:
Without mechanical damage and distinct damage in appearance.
Immersion cleaning
At normal temperature : 300 sec. Using Isopropyl alcohol.
For other procedures, refer to IEC 60115-1, Sub-clause 4.29.
Marking shall be legible.
Method;
Specification;
Method;
Specification;
The resistor shall be subjected to 5 continuous cycles, each as shown in the figure below.
For other procedures, refer to IEC 60115-1, Sub-clause 4.19.
Change in resistance
Without mechanical damage such as breaks and distinct damage in appearance.
Marking shall be legible.
The specimen shall be placed in the test chamber at a temperature 40±2deg C and a relative humidity
90 to 95 %, and then subjected to a voltage cycle consisting of rated d.c. voltage application of 1 hr 30
min and rest of 30 min repeatedly for 1000 +48/0 hrs.
However the applied voltage shall not exceed the limited element voltage.
For other procedures, refer to IEC 60115-1, Sub-clause 4.24.
Change in resistance
Without mechanical damage such as breaks and distinct damage in appearance.
Marking shall be legible.
Chip resistor RR0816 series
１ Minimum operating temperature±３deg C
２ Standard atmospheric conditions
３ Maximum operating temperature±２deg C
４ Standard atmospheric conditions
Specification for
:
:
±(0.5%+0.05Ω)
±(0.5%+0.05Ω)
SUSUMU
CO.,LTD
SPEC.NO:
2∼3 min
2∼3 min
30 min
30 min
RR00-1098
Rev. No.
0
8/16