SDK-ZB2430-Q-X-A Laird Technologies, SDK-ZB2430-Q-X-A Datasheet - Page 3

• Manufacturer Part Number: SDK-ZB2430-Q-X-A
• Description: KIT DESIGN FOR ZB2430-Q
• Manufacturer: Laird Technologies
• Series: ZigBee™ Your Way™ AeroCommr
• Type: 802.15.4/Zigbeer

Specifications of SDK-ZB2430-Q-X-A

• For Use With/related Products: ZB2430-Q-X-A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contents: -

ZB2430
Wireless Module
QuiCk start
guide
3
www.lairdtech.com
radiO COnfiguratiOn
8. Click on the Configure tab.
9. Click on the Read Radio button; this will display the modules internal configuration.
10. A dialog box will appear and will display one of two messages:
COnfigure taB
You can use this screen to make changes and write those changes to the module.
a. If “Read Successful” is displayed, click on OK and continue to step 12.
b. If “Unable to enter command mode. Would you like to try using Auto Baud?” is displayed, follow these steps:
1) Move the J9 jumper to the Force 9600 Baud position.
2) Reset the radio module with the Reset button on the SDK
3) In the OEM software go to the PC Settings Tab and change the baud rate to 9600
4) Change back to the Configure Tab
5) Click on the Read Radio button again.
6) The Interface Baud field will now display the Baud setting of the module.
7) Move the J9 jumper back to the Normal Operation position.
8) Click on the PC Settings tab.
9) Locate the Baud Rate field and set it to match the Baud setting of the module.
10) Click on the Configure tab.
11) Go back to step 10.
Laird Technologies