101-1285 Rabbit Semiconductor, 101-1285 Datasheet - Page 22

• Manufacturer Part Number: 101-1285
• Description: DEV KIT DELUXE MINICORE RCM5600W
• Manufacturer: Rabbit Semiconductor
• Series: MiniCore™r
• Type: Transceiver, 802.11 b/gr

Specifications of 101-1285

• Frequency: 2.4GHz
• Processor To Be Evaluated: Rabbit 5000
• Processor Series: RCM5600W
• Interface Type: RS-232, USB, PCI
• Maximum Operating Temperature: + 55 C
• Minimum Operating Temperature: - 30 C
• Operating Supply Voltage: 3.15 V to 3.45 V
• Silicon Manufacturer: Rabbit Semiconductor
• Silicon Family Name: RabbitCore
• Kit Contents: Board
• Features: On-board Single-Chip 802.11b/g Transceiver, Built-In Web Server
• Development Tool Type: Hardware /
• Rohs Compliant: Yes
• For Use With/related Products: RCM5600W
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• Other names: 316-1161

First, prepare the AC adapter for the country where it will be used by selecting the plug.
The deluxe Development Kit presently includes Canada/Japan/U.S., Australia/N.Z., U.K.,
and European style plugs. Snap in the top of the plug assembly into the slot at the top of
the AC adapter as shown in Figure 5, then press down on the spring-loaded clip below the
plug assembly to allow the plug assembly to click into place. Release the clip to secure the
plug assembly in the AC adapter.
Connect the AC adapter to DC input jack J6 on the Interface Board as shown in Figure 5.
Plug in the AC adapter. The green power LED on the Interface Board should light up. The
RCM5600W and the Interface Board are now ready to be used.
Note that the center pin of J6 is positive.
2.3 Run a Sample Program
If you already have Dynamic C installed, you are now ready to test your programming
connections by running a sample program. Start Dynamic C by double-clicking on the
Dynamic C icon on your desktop or in your
menu. Select the “Communications” tab
Start
in the Dynamic C
Options > Project Options
menu and verify that
Use USB to Serial
Converter
is selected to support the USB cable. Choose
Store Program in RAM
on the
“Compiler” tab for faster compiling when running sample programs. Click
OK
.
You may have to select the COM port assigned to the USB USB cable on your PC. In
Dynamic C, select
Options > Project Options
, then select this COM port on the “Com-
munications” tab, then click
OK
. You may type the COM port number followed by
Enter
on your computer keyboard if the COM port number is outside the range on the dropdown
menu.
Now find the WIFISCAN.C sample program in the Dynamic C Samples\WiFi folder,
open it with the File menu, then compile and run the sample program by pressing F9.
The Dynamic C
window will display
, and will display a list
STDIO
Starting scan....
of access points/ad-hoc hosts similar to the one shown here.
The following fields are shown in the Dynamic C
window.
STDIO
• Channel—the channel the access point is on (1–11).
• Signal—the signal strength of the access point.
• MAC—the hardware (MAC) address of access point.
• Access Point SSID—the SSID the access point is using.
16
MiniCore RCM5600W