AC164105 Microchip Technology, AC164105 Datasheet - Page 14

• Manufacturer Part Number: AC164105
• Description: MODULE RCVR RFPIC 433MHZ (PKG/5)
• Manufacturer: Microchip Technology
• Type: Receiverr

Specifications of AC164105

• Frequency: 433MHz
• Wireless Frequency: 433.92 MHz
• Modulation: ASK
• For Use With/related Products: PICkit™ 1
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

rfPIC™ Development Kit 1 User’s Guide
2.4
2.5
2.6
DS70093A-page 10
XMIT_DEMO
RCVR_DEMO
RCVR_ANALOG_DISPLAY
XMIT-DEMO is the default program that is preprogrammed into the transmitter module. It
is used with the receiver module programs rcvr_demo and rcvr_analog_display.
This program demonstrates simple command, control and analog application demon-
strations. To see each demonstration, the user must load the appropriate receiver code
examples:
rcvr_demo.asm and rcvr_demo.hex
When a push button on the transmitter module is depressed, the corresponding LED is
lit on the PICkit 1 FLASH Starter Kit. Pressing the transmitter module push button GP3
lights LED D0 on the PICkit 1 Starter Kit. Pressing push button GP4 lights LED D1.
rcvr_analog_display.asm and rcvr_analog_display.hex
Pressing transmitter module push button GP3 lights LEDs D0-D7 on the PICkit Starter
Kit with the upper 8-bit value read from the transmitter module 10-bit A/D channel 0
connected to potentiometer GP0. Pressing push button GP4 lights LEDs D0-D7 with
the upper 8-bit value read from A/D channel 1 connected to potentiometer GP1.
The protocol is a simplified K
products. This receive code was adapted from Microchip Technology application note
AN740.
The 10-bit analog value is placed into the 16-bit counter field of the simplified K
protocol.
This program demonstrates a simple command and control application. When a push
button on the transmitter module is depressed, the corresponding LED is lit on the
PICkit 1 FLASH Starter Kit.
Pressing transmitter module push button GP3 lights LED D0 on the PICkit 1. Pressing
push button GP4 lights LED D1.
The protocol is a simplified K
products. This receive code was adapted from Microchip Technology application note
AN740.
This program demonstrates a simple analog display application. When a push button
on the transmitter module is depressed, the corresponding LED is lit on the PICkit 1
FLASH Starter Kit.
Pressing transmitter module push button GP3 lights LEDs D0-D7 on the PICkit Starter
Kit with the upper 8-bit value read from the transmitter module 10-bit A/D channel 0
connected to potentiometer GP0. Pressing push button GP4 lights LEDs D0-D7 with
the upper 8-bit value read from A/D channel 1 connected to potentiometer GP1.
The protocol is a simplified K
products. This receive code was adapted from Microchip Technology application note
AN740.
The 10-bit analog value is placed into the 16-bit counter field of the simplified K
protocol.
Preliminary
EE
EE
EE
L
L
L
OQ
OQ
OQ
®
protocol compatible with the HCS101 fixed code
protocol compatible with the HCS101 fixed code
protocol compatible with the HCS101 fixed code
© 2003 Microchip Technology Inc.
EE
EE
L
L
OQ
OQ