ADNK-3043-ND24 Avago Technologies US Inc., ADNK-3043-ND24 Datasheet - Page 5

• Manufacturer Part Number: ADNK-3043-ND24
• Description: WIRELESS MOUSE DESIGN KIT
• Manufacturer: Avago Technologies US Inc.
• Type: Wireless Mouse Development Kitr

Specifications of ADNK-3043-ND24

• Frequency: 2.4GHz
• Wireless Frequency: 2.4 GHz
• Interface Type: USB
• For Use With/related Products: ADNS-3043
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Some details on ADNK-3043-ND24
The ADNK-3034-ND24 reference design kit allows users
to evaluate the performance of the Optical Tracking
Engine (sensor, lens, LED assembly clip, LED) over a RF
connection. This kit also enables users to understand the
recommended mechanical assembly. (See Appendix C,
D, and E)
System Requirements
PCs using Windows 95/ Windows 98/ Windows NT/
Windows 2000 with standard 3-button USB mouse
driver loaded.
Functionality
This reference design is an optical mouse with three
buttons and a scroll wheel.
USB Operating Mode
The receiver dongle is hot pluggable into the USB port.
The PC does not need to be powered off when plugging
or unplugging the receiver dongle for the evaluation
mouse.
Figure 4. Exploded view of the ADNS-3040 optical tracking engine
5
Caution: The lens is not permanently attached to the sensor and will drop out of the assembly.
To Disassemble the ADNK-3043-ND24 Unit
The ADNK-3034-ND24 comprises of the plastic mouse
casing, a main printed circuit board (PCB), lens, buttons,
and a 2.4 GHz RF daughter card, and a 2.4 GHz USB
receiver dongle. (See Figure 4.) Removing the screws
located at the base of the unit separate the top and the
bottom of the mouse casing. Removing the PCB assembly
from the base plate further disassembles the mouse unit.
Be careful with the battery terminals while separating the
PCB assembly with the bottom casing.
While reassembling the components, please make sure
that the Z height (Distance from lens reference plane to
surface) is maintain. Refer to Figure 5.
Figure 5. Distance from lens reference plane to surface
2.55
0.10
HLMP-ED80-PS000 (LED)
ADNS-2220-001
Customer supplied
ADNS-3040
ADNS-3120-001
Customer supplied base
plate with recommended
alignment features per
IGES drawing
Sensor
Object Surface
Lens