ADNK-3043-TI27 Avago Technologies US Inc., ADNK-3043-TI27 Datasheet - Page 5

• Manufacturer Part Number: ADNK-3043-TI27
• Description: WIRELESS MOUSE DESIGN KIT
• Manufacturer: Avago Technologies US Inc.
• Type: Wireless Mouse Development Kitr

Specifications of ADNK-3043-TI27

• Frequency: 2.4GHz
• Description/function: Optical Mouse Sensor Kit
• Interface Type: USB
• Product: Display Modules
• Touch Panel: No Touch Panel
• For Use With/related Products: ADNS-3043
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

To Disassemble the ADNK-3043 TI27 Unit
The ADNK-3034 TI27 comprises of the plastic mouse casing,
a main printed circuit board (PCB), lens, buttons, and a 27
MHz RF daughter card, and a 27 MHz USB receiver dongle.
(See Figure 4.) Removing the screws located at the base
of the unit separate the top and the bottom of the mouse
casing. Removing the PCB assembly from the base plate
further disassembles the mouse unit. Be careful with the
battery terminals while separating the PCB assembly with
the bottom casing.
Figure 4. Exploded view of the ADNS-3040 optical tracking engine
Figure 5. Distance from lens reference plane to surface
5
0.094
2.40
Sensor
Object Surface
While reassembling the components, please make sure that
the Z height (Distance from lens reference plane to surface)
is maintain. Refer to Figure 5.
CAUTION: THE LENS IS NOT PERMANENTLY ATTACHED
TO THE SENSOR AND WILL DROP OUT OF THE
ASSEMBLY.
Lens
ADNS-3120-001 (Lens)
Customer supplied base
plate with recommended
alignment features per
IGES drawing
HLMP-ED80-PS000 (LED)
ADNS-3040 (Sensor)
Customer supplied PCB
ADNS-2220-001 (Clip)