BMI-S-106 Laird Technologies, BMI-S-106 Datasheet - Page 24

• Manufacturer Part Number: BMI-S-106
• Description: BOARD SHIELD 1.326X1.450" 1PIECE
• Manufacturer: Laird Technologies
• Type: 1 Piecer

Specifications of BMI-S-106

• Length - Overall: 1.450" (36.83mm)
• Width - Overall: 1.326" (33.68mm)
• Height - Overall: 0.2" (5.08mm)
• Ventilation: Vent Holes in Pattern
• Mounting Type: Solder
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 903-1011-2

CUSTOM PRECISION ELECTRONIC CONTACTS MATERIAL VARIATIONS
22
Additional material choices are available upon request . Material properties are for reference only . Product testing by purchaser is recommended to confirm . Laird Technologies assumes no liability for product failure unless specifically stated in writing .
CUSTOM PRECISION ELECTRONIC CONTACTS
Gain Maximum Electrical and Carrying Performance
From concept to placement, Laird Technologies has the expertise to deliver
custom precision surface mount contacts . Using the latest computer
simulation techniques, Laird Technologies provides properly designed contacts
that ground, carry current and signals, and interconnect boards and devices .
Laird Technologies uses basic geometric parameters (length, width,
uncompressed height, compressed height, contact force) to conduct Finite
Element Analysis (FEA) on your prospective design .
With the FEA results, we can then identify the best design to optimize a
product's operational performance . Features are incorporated to provide for
placement and soldering of the contact onto the circuit board .
Laird Technologies offers a wide range of plating options to allow for
maximum electrical current carrying performance .
CUSTOM DESIGN SHIELDS AND CONTACTS
www.lairdtech.com
301, 302, 305, 316, 201, 202
Special Alloys: Clad metals
260, 210, 220, 226, 230,
1050, 1065, 1074, 1095
510, 505, 511, 521, 544
Beryllium Copper Alloys:
Phosphor Bronze Alloys:
17200, 190, 290, 174
110, 102, 122, 1093
Stainless Steel Alloys:
Stainless Steel Alloys:
240, 268, 350, 353
Nickel Silver Alloys:
Spring Steel Alloys:
Titanium Copper
770, 752, 762
Copper Alloys:
Brass Alloys:
Post Plating
410, 420
TYPE
Thickness as required
(0,089 to 2,03)
(0,089 to 2,03)
. 0 035 to . 0 80
(0,10 to 2,29)
(0,15 to 3,18)
(0,10 to 2,29)
(0,10 to 1,52)
(0,20 to 2,03)
(0,10 to 2,29)
(0,10 to 2,29)
(0,10 to 0,30)
. 0 035 to . 0 80
. 0 04 to . 0 90
. 0 06 to . 1 25
. 0 04 to . 0 90
. 0 04 to . 0 60
. 0 08 to . 0 80
. 0 04 to . 0 90
. 0 04 to . 0 90
. 0 04 to . 0 12
THICKNESS
in (mm)
HEAT TREATMENT
Heat Treatable
Heat Treatable
Austemper
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
^
installed costs .
Contact base materials include beryllium copper, phosphor bronze, nickel
and stainless steel . All contacts are fully solderable as required .
Automated packaging allows for complex and small designs with lower
Tin, palladium, nickel, gold, silver, palladium-silver
Tin, nickel, gold, silver, zinc, black oxide, black
Tin, palladium, nickel, gold, silver
Tin, palladium, nickel, gold, silver
Tin, palladium, nickel, gold, silver
Tin, palladium, nickel, gold, silver
Tin, palladium, nickel, gold, silver
Tin, palladium, nickel, gold, silver
Tin, nickel, black oxide
PLATING/COATING
zinc, phosphate
Tin, gold
Tin, gold
(if used with LT proprietary process)
Solderable in unplated condition
Plated after heat treatment
Heat Treated as necessary
Heat Treated as necessary
Heat Treated as necessary
Pre-Plated or Post Plated
Pre-Plated or Post Plated
Pre-Plated or Post Plated
Pre-Plated or Post Plated
Pre-Plated or Post Plated
Pre-Plated or Post Plated
Pre-Plated or Post Plated
Pre-Plated or Post Plated
COMMENTS
N/A