BMI-S-106 Laird Technologies, BMI-S-106 Datasheet - Page 5

• Manufacturer Part Number: BMI-S-106
• Description: BOARD SHIELD 1.326X1.450" 1PIECE
• Manufacturer: Laird Technologies
• Type: 1 Piecer

Specifications of BMI-S-106

• Length - Overall: 1.450" (36.83mm)
• Width - Overall: 1.326" (33.68mm)
• Height - Overall: 0.2" (5.08mm)
• Ventilation: Vent Holes in Pattern
• Mounting Type: Solder
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 903-1011-2

97-2000 SHIELDS
Range of Pin and Pad Mounting Styles Maximizes Flexibility
The 97-2000 series allows mounting options including various pin styles for
through-hole mounting or pad styles for surface mounting . The frame material
forms the walls of the enclosure and the cover is held securely in place by spring
force alone . Covers can be easily removed and replaced to provide access to
components . Large or small quantities are easily manufactured using
automated tooling, short run capabilities or photochemical machining
operations .
97-2000 SHIELDS
Frame Height and Pin Option
PIN STYLE 1.
•
•
•
•
•
•
•
•
•
•
STANDARD DESIGN SHIELDS AND CONTACTS
heights available upon request
consideration; cover designed for easy removal and replacement
Variety of pin style options available including a surface mountable style
A modified pin style is available for extra retention in through hole
application
All parts are treated as custom, so standards exist
97-2000 frame heights from 0 .130" (3,0 mm) to 1" (25,4 mm), with other
Cover design permits retention even when severe shock or vibration are a
Design allows for automated pick-and-place operations
Locking feature on frame guarantees corner joint stability
Pin location can be customized to hole location or a defined pitch
Frames can be hand-formed or supplied formed and with cover assembled
RoHS compliant
Through Hole with Standoff
Height Range
.130 to 1.000
(3,3 to 25,4)
Under Cover
^
as the 1-3/4" x 2" (44,5 mm x 5,08 mm) PC shield as reference . Measurement below
400 MHz were not possible because of the aperture attenuation .
(Consult engineering for irregular hole patterns .)
FIGURE 1.
Test performance in accordance with MIL-STD-285 using an aperture the same size
Hole Pattern Layout
All dimensions shown are in inches (millimeters) unless otherwise specified .
1/2 Pitch
+ 0.006
www.lairdtech.com
1/2 Pitch
Pitch
+ 0.006
3