CB-OBS411X-04-0 ConnectBlue, CB-OBS411X-04-0 Datasheet - Page 6

• Manufacturer Part Number: CB-OBS411X-04-0
• Description: BLUETOOTH V2.1+EDR MODULE 4DBM
• Manufacturer: ConnectBlue

Specifications of CB-OBS411X-04-0

• Frequency: 2.4GHz
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: Bluetooth v2.1+EDR, Class 2 & 3
• Applications: General Purpose
• Power - Output: 4dBm
• Sensitivity: -84dBm
• Voltage - Supply: 3 V ~ 6 V
• Current - Receiving: 15.5mA
• Current - Transmitting: 25.1mA
• Data Interface: Solder Pads, 2 x 20mm, 1 mm pitch
• Antenna Connector: U.FL
• Operating Temperature: -30°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Other names: 809-1034

connectBlue
Copyright © 2010 connectBlue AB
This section describes the signals available on the module interface connectors. There are three ways to connect to the OEM Serial Port
Adapter:
Figure 3: The solder pads J6 are available on the long edges of the bottom side of the PCB. The board-to-board connector pads
J2-J3 are located between the mounting holes.
Figure 4: The JST connector J8 is mounted on the component sida of the PCB as an option.
3 Electrical Interface and Connectors
Via the PCB solder pads on the edge of the PCB, J6 (see Figure 3). See Section "
information.
Via the 2x20-pin 1mm pitch board-to-board (one piece part) connectors, J2 through J3. The J2 to J3 connectors on the OEM
Serial Port Adapter exist on the module only as a mating PCB-layout pattern (see Figure 3). See Section
Board-to-Board Connectors
Optional: Via the JST connector, J8 (see Figure 4). The connector is a 6 poles wire connector. The pitch is 1mm. The
manufacturer of the mounted connector is JST and the part number is SM06B-SRSS-TB. The SM06B-SRSS-TB connector is
mated with the wire connector SHR-06V-S from JST. Other connector options are also available from JST.
" for more information.
Using the J6 PCB solder pads
"Using the J2/J3
" for more
Page 6 of 42