CC-WMX-LB69-EA Digi International, CC-WMX-LB69-EA Datasheet - Page 25

• Manufacturer Part Number: CC-WMX-LB69-EA
• Description: CONNECTCORE WI-MX51 MODULE
• Manufacturer: Digi International

Specifications of CC-WMX-LB69-EA

• Frequency: 2.4GHz, 4.9GHz ~ 5.85GHz
• Data Rate - Maximum: 65Mbps
• Modulation Or Protocol: BPSK, CCK, DBPSK, DQPSK, QPSK, 16-QAM, 64-QAM
• Applications: General Purpose
• Power - Output: 17dBm
• Antenna Connector: U.FL x 2
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Voltage - Supply: -
• Operating Temperature: -
• Sensitivity: -
• Memory Size: -
• Data Interface: -
• Current - Transmitting: -
• Current - Receiving: -
• Other names: 602-2321; CC-W51-LB6A-EA; CC-W51-LB6A-VE; CC-WMX-LB6A-EA

© 2010 Digi International, Inc.
ConnectCore Wi‐i.MX51
Jumper
S6.1
S6.2
S6.3
S6.4
Jumper
S7.1
S7.2
Jumper
S8.1
S8.2
S8.3
S8.4
Name
Auto Power Down
RS232
Name
LINE OUT MODE
Name
RS232#/RS485
Auto Power Down
4WIRE#/2WIRE
TERMINATON
Switch S6-UART1 (MEI):
Switch S7-UART2 (CONSOLE):
Switch S8-AUDIO:
For LINE OUT mode, S8.1 = ON and all other
Description
Auto Power Down is not supported on this
board. This signal is only accessible to permit
the user to completely disable the MEI interface
for using signals for other purposes. To disable
the MEI interface go in RS232 mode (S6.1 =
ON) and activate Auto Power Down (S6.2 =
ON). Be sure that no cable is connected to DB9
connector.
Description
Description
switches OFF.
For CAPLESS mode, S8.1 = OFF and all other
switches ON.
See S8.1
See S8.1
See S8.1
On = Auto Power Down enabled
On = RS232 transceiver disabled
Settings
On = (DEFAULT)
RS232 transceiver enabled
RS422/485 transceivers disabled
Off =
RS232 transceiver disabled
RS422/485 transceivers enabled
On = Auto Power Down enabled
Off = Auto Power Down disabled (DEFAULT)
On = 2 wire interface (RS422/RS485)
Off = 4 wire interface (RS422) (DEFAULT)
On = Termination on
Off = No termination (DEFAULT)
Settings
Off = Auto Power Down disabled (DEFAULT)
Off = RS232 transceiver enabled (DEFAULT)
Settings
On = Line Out Mode
Off = Capless Mode (DEFAULT)
25