JWM11BC2A-H NKK Switches, JWM11BC2A-H Datasheet - Page 2

• Manufacturer Part Number: JWM11BC2A-H
• Description: SWITCH ROCKER TV5 SPST VERT RED
• Manufacturer: NKK Switches
• Series: JWr
• Type: Internationally Approved TV Rated Rockers, High Inrush 10, 16 Ampr

Specifications of JWM11BC2A-H

• Circuit: SPST
• Switch Function: On-Off
• Contact Rating @ Voltage: 10A @ 125VAC
• Illumination: Non-Illuminated
• Mounting Type: Panel Mount, Snap-In
• Termination Style: Solder, Quick Connect - .110" (2.8mm)
• Panel Cutout Dimensions: 24.00mm x 15.40mm
• Contact Form: SPST
• Contact Rating: 10 Amps at 125 VoltsAC, 250 VoltsAC
• Actuator: Rocker, with Barrier
• Mounting Style: Panel
• Terminal Seal: Epoxy
• Contact Plating: Silver
• Features: Industry's first molded rocker with TV rating, with gray barrier, black housing; designed to handle large inrush current
• Voltage Rating Ac: 125 Volts, 250 Volts
• Pole Throw Configuration: SPST
• Switch Configuration: ON None OFF
• Actuator Style: Rocker
• Actuator Material: Polyphenylene Ether
• Current Rating (max): 10A
• Ac Voltage Rating (max): 250VVAC
• Mechanical Life: 25000
• Contact Material: Silver Alloy
• Housing Material: Melamine/Polyamide
• Product Height (mm): 33.6mm
• Product Depth (mm): 22.2mm
• Product Length (mm): 30mm
• Operating Temp Range: -25C to 70C
• Terminal Type: Quick Connect/Solder Lug
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Series JW
High Inrush 10 & 16 Amp Rockers
Distinctive
Characteristics
B
Industry’s first molded rocker with TV rating. Designed to handle large inrush current,
with high electrical capacity of 10 and 16 Amps. JWM models certified for TV-5 rating
and JWL models for TV-8 rating.
JWMW and JWLW panel seal versions meet IP67 of
IEC60529 Standards (similar to NEMA 4 and 6).
Prominent external insulating barriers increase
insulation resistance and dielectric strength.
Uniquely constructed to break light
contact welds.
Increased electrical life with specially
designed plate to minimize contact bounce.
Constructed for dust resistance with interior
cover between actuator and contact area.
Terminals are molded in and epoxy sealed to
lock out flux, dust, and other contaminants.
Solder lug/quick connect terminals can be used
with connector.
Housing and case of heat resistant resin meet UL94V-0 standard.
Actual Size JWM
www.nkk.com
B41