SST89V58RD2-33-C-NJE Microchip Technology, SST89V58RD2-33-C-NJE Datasheet - Page 45

• Manufacturer Part Number: SST89V58RD2-33-C-NJE
• Description: IC MCU 8BIT 40KB FLASH 44PLCC
• Manufacturer: Microchip Technology
• Series: FlashFlex®r

Specifications of SST89V58RD2-33-C-NJE

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 44-LCC (J-Lead)
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 33MHz
• Connectivity: EBI/EMI, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, WDT
• Number Of I /o: 36
• Eeprom Size: 8K x 8
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Oscillator Type: External
• Operating Temperature: 0°C ~ 70°C
• Processor Series: SST89xxxRD
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: SPI, UART
• Maximum Clock Frequency: 33 MHz
• Number Of Programmable I/os: 32
• Number Of Timers: 3
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 70 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: 0 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

FlashFlex MCU
SST89V54RD2/RD / SST89V58RD2/RD
8.0 PROGRAMMABLE COUNTER ARRAY
The Programmable Counter Array (PCA) present on the
SST89V5xRD2/RD is a special 16-bit timer that has five
16-bit capture/compare modules. Each of the modules can
be programmed to operate in one of four modes: rising
and/or falling edge capture, software timer, high-speed out-
put, or pulse width modulator. The 5th module can be pro-
grammed as a Watchdog Timer in addition to the other four
modes. Each module has a pin associated with it in port 1.
Module 0 is connected to P1.3 (CEX0), module 1 to P1[4]
(CEX1), module 2 to P1[5] (CEX2), module 3 to P1[6]
(CEX3), and module 4 to P1[7] (CEX4). PCA configuration
is shown in Figure 8-1.
8.1 PCA Overview
PCA provides more timing capabilities with less CPU inter-
vention than the standard timer/counter. Its advantages
include reduced software overhead and improved accuracy.
The PCA consists of a dedicated timer/counter which
serves as the time base for an array of five compare/cap-
ture modules. Figure 8-1 shows a block diagram of the
TABLE
©2007 Silicon Storage Technology, Inc.
FIGURE
CPS1
0
0
1
1
8-1: PCA Timer/Counter Source
CPS0
8-1: PCA Timer/Counter and Compare/Capture Modules
0
1
0
1
PCA Timer/Counter
16 Bits
(maximum rate = f
External clock at ECI pin
Timer 0 overflow
12 Clock Mode
f
OSC
f
OSC
/12
/4
OSC
/8)
45
PCA. External events associated with modules are shared
with corresponding Port 1 pins. Modules not using the port
pins can still be used for standard I/O.
Each of the five modules can be programmed in any of the
following modes:
•
•
•
•
•
8.2 PCA Timer/Counter
The PCA timer is a free-running 16-bit timer consisting of
registers CH and CL (the high and low bytes of the count
values). The PCA timer is common time base for all five
modules and can be programmed to run at: 1/6 the oscilla-
tor frequency, 1/2 the oscillator frequency, Timer 0 overflow,
or the input on the ECI pin (P1.2). The timer/counter source
is determined from the CPS1 and CPS0 bits in the CMOD
SFR as follows (see “PCA Timer/Counter Mode Register
(CMOD)” on page 26):
16 Bits Each
Module 0
Module 1
Module 2
Module 3
Module 4
Rising and/or falling edge capture
Software timer
High speed output
Watchdog Timer (Module 4 only)
Pulse Width Modulator (PWM)
(maximum rate = f
External clock at ECI pin
P1.3/CEX0
P1.4/CEX1
P1.5/CEX2
P1.6/CEX3
P1.7/CEX4
1255 F23.0
Timer 0 overflow
6 Clock Mode
f
f
OSC
OSC
/6
/2
OSC
S71255-10-000
/4)
Data Sheet
T8-1.0 1255
12/07