CM2006-02QR ON Semiconductor, CM2006-02QR Datasheet - Page 3

• Manufacturer Part Number: CM2006-02QR
• Description: IC VGA PORT COMPANION 16QSOP
• Manufacturer: ON Semiconductor
• Series: Praetorian®r
• Type: The CM2006 connects between the VGA or DVI-I port connector and the internal analog or digital flat panel controller logic.r

Specifications of CM2006-02QR

• Applications: Monitors, TV
• Voltage - Supply: 5V
• Package / Case: 16-QSOP
• Mounting Type: Surface Mount
• Operating Supply Voltage: - 0.5 V to + 6 V
• Supply Current: 10 uA
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Number Of Channels: 7
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Interface: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CM2006
Ordering Information
LEAD(s)
10
11
12
13
14
15
16
1
2
3
4
5
6
7
8
9
Pins
16
Note 1: Parts are shipped in Tape and Reel form unless otherwise specified.
SYNC_OUT1
SYNC_OUT2
DDC_OUT1
SYNC_IN1
SYNC_IN2
DDC_OUT
VIDEO_1
VIDEO_2
VIDEO_3
DDC_IN1
DDC_IN2
ENABLE
NAME
V
GND
BYP
CC_DDC
V
CC
Package
QSOP
DESCRIPTION
This is a supply input for the SYNC_1 and SYNC_2 level shifters, video protection and the
DDC circuits.
Active high enable. Disables the Sync buffer outputs when low.
Video signal ESD protection channel. This pin is typically tied one of the video lines between
the controller device and the video connector.
Video signal ESD protection channel. This pin is typically tied one of the video lines between
the controller device and the video connector.
Video signal ESD protection channel. This pin is typically tied one of the video lines between
the controller device and the video connector.
Ground reference supply pin.
This is an isolated supply input for the DDC_1 and DDC_2 level-shifting N-FET gates.
An external 0.22uF bypass capacitor is required on this pin.
DDC signal input. Connects to the video connector side of one of the DDC lines.signal
output.
DDC signal output. Connects to the monitor DDC logic.
DDC signal output. Connects to the monitor DDC logic.
DDC signal input. Connects to the video connector side of one of the DDC lines
Sync signal buffer input. Connects to the video connector side of one of the sync lines.
Sync signal buffer output. Connects to the monitor SYNC logic.
Sync signal buffer input. Connects to the video connector side of one of the sync lines.
Sync signal buffer output. Connects to the monitor SYNC logic.
PART NUMBERING INFORMATION
Rev.2 | Page 3 of 9 | www.onsemi.com
PIN DESCRIPTIONS
Ordering Part Number
CM2006-02QR
1
CM2006-02QR
Part Marking