E3F2-R2Z1 Omron, E3F2-R2Z1 Datasheet - Page 4

• Manufacturer Part Number: E3F2-R2Z1
• Description: Industrial Photoelectric Sensors LIGHT-ON NP RETROREF
• Manufacturer: Omron
• Type: Photoelectric Sensorr
• Series: E3F2r

Specifications of E3F2-R2Z1

• Features: DC switching types with connectors
• Height: 90 mm
• Length: 24 mm
• Maximum Operating Temperature: + 55 C
• Minimum Operating Temperature: - 25 C
• Width: 24 mm
• Sensing Distance: 2 mm to 100 mm
• Output Configuration: Light ON
• Output Current: 200mA
• Sensor Output: SCR LO
• Switch Terminals: Wire Leaded
• Supply Voltage Min: 24VAC
• Sensor Housing: Cylindrical
• Sensor Input: Optical
• Output Type: SCR LO
• Supply Voltage Max: 240VAC
• Sensing Method: Retroreflective
• Sensing Object: Mirror
• Sensing Light: Infrared
• Mounting Type: M18 Threaded Body, Nut
• Current - Supply: 5mA
• Voltage - Supply: 24 V ~ 240 V
• Package / Case: Axial, Pre-Wired
• Sensing Mode: Retroreflective
• Sensing Range Max: 2m
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Specifications
Ratings
*1.
*2.
*3.
4
Item
Sensing method
Power supply voltage
Current consumption
Sensing distance
Standard object
Directional angle
Differential travel
(hysteresis)
Black/white error
Response time
Control output
Power reset time
Ambient illumination
Ambient temperature
Ambient humidity
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Degree of protection
Light source (wave
length)
Indicators
Sensitivity adjustment
Connection method
Operation mode
Weight (approx.)
Circuit protection
Housing materials
Plastic
case
Metal
case
The IP69k test according to DIN 40 050 part 9 is intended to simulate high pressure/steam cleaning. During the test 14-16 l/min water at 80°C is sprayed onto the
sensor from different angles with 8000-10000 kPa. The sensor may not suffer any damaging effects from high pressure water in appearance and functionality.
For other cable materials (e.g. PUR) contact your OMRON sales representative.
For stainless steel types refer to separate datasheet E3F2 SUS
pre-wired
(2 m)
connector
pre-wired
(2 m)
connector
*3
*1
E3F2-7
Through-beam
10 to 30 VDC
50 mA max.
7 m
Opaque:
11 mm dia. min.
3° to 20°
–
–
Operation and
Reset:
2.5 ms max.
Transistor (open collector), load current: 100 mA max. (residual voltage: 2 V max.)
50 ms
Incandescent lamp:3000 lx max. / Sunlight:10000 lx max.
Operating: -25 to 55 °C / Storage: -30 to 70 °C (with no icing or condensation)
Operating: 35% to 85% / Storage: 35% to 95% (with no condensation)
20 MΩ min. at 500 V DC between energized parts and case
1000 VAC max., 50 / 60 Hz for 1 min between energized parts and case
10 to 55 Hz, 1.5 mm double amplitude for 2 hrs each direction (X, Y, Z)
Destruction: 500 m/s
IEC 60529 IP67, IP69K after DIN 40050-9
Infrared LED
(950 nm)
Light incident /
power indicator
for light source
(red)
Fixed
2 m, 5 m pre-wired cable (PVC, dia. 4 mm (18 / 0.12)
Light-ON or Dark-ON selectable by wiring
120 g
40 g
180 g
120 g
Output short-circuit and power supply reverse polarity
Case: ABS (plastic models) or nickel brass (metal models); lens: PMMA
@
E3F2-R4
Retro-reflective
with M.S.R.
30 mA max.
0.1 to 4 m
(with E39-R1S)
Opaque:
56 mm dia. min.
1 ms max
100 ms max.
Red LED
(660 nm)
Light incident
(red) /
stability (green)
Adjustable
60 g
20 g
90 g
50 g
2
each direction (X, Y, Z)
@
-
@
E3F2-DS10
Diffuse-reflective
Wide beam
25 mA max.
0.1 m
(5 x 5 cm white
mat paper)
–
–
20% max.
2.5 ms max.
50 ms
Infrared LED (880 nm)
Light incident / power indicator for
light source (red)
Fixed
@
*2
) or M12-connector
E3F2-DS30
Potentiometer adjustment
30 mA max.
0.3 m
(10 x 10 cm white
mat paper)
Adjustable
@
Standard Photoelectric Sensors
E3F2-D1
1 m
(30 x 30 cm white
mat paper)
1 ms max.
100 ms
Light incident
(red) /
stability (green)
@
4-
@
E3F2-LS10
Background
suppression
0.1 m
(10 x 10 cm white
mat paper)
5% max
3%
Red LED
(660 nm)
Output indicator
(orange) /
stability (green)
Fixed
@
4-
@