STM32-P103 Olimex Ltd., STM32-P103 Datasheet - Page 2

• Manufacturer Part Number: STM32-P103
• Description: MCU, MPU & DSP Development Tools HDR BRD FOR STM32F103RBT6
• Manufacturer: Olimex Ltd.

Specifications of STM32-P103

• Processor To Be Evaluated: STM32F103RBT6
• Data Bus Width: 32 bit
• Interface Type: USB, CAN, I2C, JTAG, SPI, UART
• Dimensions: 100 mm x 90 mm
• Operating Supply Voltage: 3.3 V
• Tool Type: Prototyping Board
• Core Architecture: ARM
• Cpu Core: ARM Cortex M3
• Silicon Manufacturer: ST Micro
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32F1xx
• Kit Contents: Board
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1701513 25R5110

INTRODUCTION:
BOARD FEATURES:
ELECTROSTATIC WARNING:
STM32-P103 board is development board which allow exploring the
complete
microcontrollers produced by ST Microelectronics Inc.
The board have SD/MMC card connector and allow USB Mass storage
device demo to be evaluated. The RS232 driver and connector allow USB to
Virtual COM port demo to be evaluated. The CAN port and driver allow CAN
applications to be developed. The UXT connector allow access to all other
UEXT modules produced by OLIMEX like MOD-MP3, MOD-NRF24LR,
MOD-NOKIA6610 etc to be connected easily. In the prototype area
customer can solder his own custom circuits and to interface them to USB,
CAN, RS232 etc.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The STM32-P103 board is shipped in protective anti-static packaging. The
board must not be subject to high electrostatic potentials. General practice
for working with static sensitive devices should be applied when working
with this board.
CPU: STM32F103RBT6 ARM 32 bit CORTEX M3™
JTAG connector with ARM 2x10 pin layout for programming/debugging
with ARM-JTAG, ARM-USB-OCD, ARM-USB-TINY
USB connector
CAN driver and connector
RS232 driver and connector
UEXT connector which allow different modules to be connected (as
MOD-MP3, MOD-NRF24LR, etc)
SD-MMC connector
backup battery connector
user button
RESET button
status LED
power supply LED
on board voltage regulator 3.3V with up to 800mA current
single power supply: takes power from USB port or extension connector
pin
8 Mhz crystal oscillator
32768 Hz crystal and RTC backup battery connector
extension headers for all uC ports
RESET button
status LED
power supply LED
on board voltage regulator 3.3V with up to 800mA current
single power supply: takes power from USB port or power supply jack
PCB: FR-4, 1.5 mm (0,062"), soldermask, silkscreen component print
Dimensions: 100 x 90mm (3.94 x 3.5")
features
of
the
new
ARM
Cortex
M3
STM32F103RBT6