H7CN-BLN-AC100-240 Omron, H7CN-BLN-AC100-240 Datasheet - Page 4

• Manufacturer Part Number: H7CN-BLN-AC100-240
• Description: Controllers Rev count 100-240VAC 30cps SPST-NO outpu
• Manufacturer: Omron
• Type: 1/16 DIN Digital Counterr

Specifications of H7CN-BLN-AC100-240

• Analog / Digital: Digital
• Voltage Rating: 100 V to 240 V
• Mounting: DIN Rail
• Counting Method: Reversible
• Display Type: 4-Digit LED
• Size: 72.5 mm L x 48 mm W x 44.8 mm H
• Features: Easy to read, contact and solid state inputs for count and reset
• Output Type: Sustained until reset
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Up/Down Type
Note: (A) must be more than the minimum signal width. If (A) is set shorter than the minimum signal width, the error of count 1 may occur.
H7CN
Timing Charts
Up/Down Selectable Type
Note: (A) must be more than the minimum signal width. If (A) is set shorter than the minimum signal width, the error of count 1 may occur.
H: Short-circuit ON-time impedance; 1 k max. Residual voltage; 0.5 V max.
L: Open-circuit OFF-time impedance; 100 k min.
Count input 1: Count input; Count input 2: Inhibit (gate) input
Note: Input to the CP2 while the CP1 is set to "L."
Note: Input to the CP2 while the CP1 is set to "L."
Up/Down A command input
Count
input 1
Count
value
Count
input 1
Count
input 2
Count
value
Count input 1: Inhibit (gate) input; Count input 2: Count input
Count
input 1
Count
value
Count
input 2
Count
input 2
INPUT MODE
Up mode
Inhibited
Inhibited
4
Count input 1: Count input; Count input 2: Inhibit (gate) input
Up/Down B individual input
Count
value
Count
input 1
Count
value
Note: Input to the CP2 while the CP1 is set to "L."
Count input 1: Inhibit (gate) input; Count input 2: Count input
Note: Input to the CP2 while the CP1 is set to "L."
Count
input 1
Count
input 2
Count
input 2
Count
input 1
Count
value
Count
input 2
Down mode
Inhibited
Inhibited
H7CN