142-0403-101 Emerson Network Power, 142-0403-101 Datasheet - Page 2

• Manufacturer Part Number: 142-0403-101
• Description: CONN PLUG RIGHT ANGLE CRIMP GOLD
• Manufacturer: Emerson Network Power
• Series: SMAr
• Type: Cable Plugr

Specifications of 142-0403-101

• Connector Style: SMA
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line), Right Angle
• Fastening Type: Threaded
• Cable Group: RG-161, 174, 188, 316, LMR-100
• Frequency - Max: 12.4GHz
• Frequency-max: 12.4GHz
• Body Style: Right Angle
• Cable Type: RG 161/U, 174, 188, 316, LMR100, HPF100, RF100
• Features: Captivated contact
• Frequency Range: 0 GHz to to 12.4 GHz
• Housing Material: Brass
• Mounting Angle: Right
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: SMA
• Product: Various Connectors
• Contact Plating: Gold
• Shell Plating: Gold
• Termination Style: Crimp
• Maximum Frequency: 12.4 GHz
• Angle: Right-Angle
• Finish, Housing: Gold
• Material, Contact: Brass
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: SMA
• Special Features: Captivated Contact
• Termination: Crimp
• Voltage, Rating: 250 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 140-0403-101; 1420403101; J510

SMA RIGHT ANGLE SOLDER
TYPE PLUG FOR SEMI-RIGID CABLE
Assembly
Instructions
2
Johnson Components
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
RG 405/u (.086 semi-rigid)
RG 402/u (.141 semi-rigid)
CABLE GROUP
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Insert cable into body making certain that the
4. Solder body to cable using 60/40 tin/lead solder
5. Press end cap into body access port using .187
center conductor during strip operations.
cable insulation bottoms on the center contact.
Solder center conductor to contact using 60/40
tin/lead solder as shown. Use a minimum
amount of solder for a good joint.
as shown. Use a minimum of heat to minimize
cable insulation movement.
(4.75) dia. flat punch.
142-0693-101/106
142-0694-101/106
PART NUMBER
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
.145 (3.68)
.170 (4.32)
“A”
INCHES (MILLIMETERS)
.075 (1.90)
.105 (2.67)
“B”