TLF9UA502WR32K1 Taiyo Yuden, TLF9UA502WR32K1 Datasheet - Page 31

• Manufacturer Part Number: TLF9UA502WR32K1
• Description: CHOKE COMMON MODE 5000UH
• Manufacturer: Taiyo Yuden
• Series: TLF9UAr

Specifications of TLF9UA502WR32K1

• Current: 320mA
• Inductance: 5mH
• Dc Resistance (dcr): 2.5 Ohm Max
• Filter Type: Common Mode - 2 Line Array
• Package / Case: 0.669" L x 0.433" W x 0.630" H (17.00mm x 11.00mm x 16.00mm)
• Mounting Type: Through Hole
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Impedance: -
• Other names: 587-2791

【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
【Test method and remarks】
■
＊ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
co0304_reli_e-01
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
CM-RA/BU-RA Type
CM-RB Type
TLH, TLF Type
10. Withstanding : between wires and core
11. Rated voltage
12. Resistance to vibration
13. Solderability
14. Resistance to soldering heat
15. Thermnal shock
16. Damp heat
TLH, TLF : Applied voltage : 2000VAC (TLH, TLF (except TLF9UB))
TLH, TLF (except TLF9UB) : 250VAC
TLF9UB
CM, TLH, TLF : According to JIS C 0040
CM
TLH, TLF : Solder temperature : 245±5℃
CM
TLH, TLF : Solder temperature : 260±5℃
CM, TLH, TLF :
TLH, TLF : Temperature : 60±2℃
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
RELIABILITY DATA
Direction
Frequency range : 10 to 55 to 10Hz (1 min.)
Amplitude
Mounting method : soldering onto PC board
Recovery
According to JIS C 0025
Conditions for 1 cycle
Number of cycles : 10
Recovery
Step
1
2
3
4
: Solder temperature : 235±5℃
: Solder temperature : 260±5℃
Duration
Immersion depth
Duration
Immersion depth
Duration
Immersion depth
Recovery
Duration
Immersion depth
Recovery
Duration
Humidity
Duration
Recovery
Room Temperature
Room Temperature
Temperature 〔℃〕
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2 hrs.
: 2 to 24 hrs of recovery under the standard condition after the test. (CM-RB)
: 2hrs each in X, Y and Z direction
: 1.5mm (shall not exceed acceleration 196m/s
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2hrs. (TLH, TLF)
ー25±3
＋85±2
: 90～95％RH
: 500 hrs
: At least 1hr of recovery under the standard removal from test chamber followed by the measurement within 2 hrs.
40±2℃ (※TLF14CB)
: 50VDC
: 500VDC (TLF9UB)
: 60sec.
: 5±0.5sec.
: Up to 2～2.5mm from terminal root.
: 1 to 2 hrs of recovery under the standard condition after the test.
: 10±1sec.
: Up to 1.0 to 1.5mm from PBC mounted level.
: At least 1hr of recovery under the standard condition after the removal from test chamber, followed by the measurement within 2hrs.
: 2±0.5sec.
: According to detailed specification.
: 4±1sec.
: Up to 1.0 to 1.5mm from PBC mounted level.
No abnormality
Within the specified range
Appearance : No abnormality
TLF9U : Inductance change : Within ±5％
At least 75% of terminal electrode is covered by new solder.
Solder shall be uniformly adhered onto immersed surfaces.
Appearance : No abnormality
TLF9UA : Inductance change : Within ±5%
Appearance : No abnormality
TLF9UA
TLH, TLF (except TLF9UA) : Withstanding voltage : No abnormality
TLF9UA
TLH, TLF (except TLF9UA) : Withstanding voltage : No abnormality
Durration 〔min〕
Within 3
Within 3
30±3
30±3
Total : 6hrs
2
: Inductance change
)
: Inductance change
Inductance change : Refer to individual specification
Inductance change : Within ±15%
TLH, TLF (except TLF9U) : Within the specified range
: Within ±15%
: Within ±15%
Inductance change : Refer to individual specification
TLF14CB : Within the specified range
1 1
Insulation resistance : No abnormality
Insulation resistance : No abnormality
co0304_reli-RP2