PIC18F26K80-I/SS Microchip Technology, PIC18F26K80-I/SS Datasheet - Page 420

• Manufacturer Part Number: PIC18F26K80-I/SS
• Description: MCU PIC 64KB FLASH 28SSOP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F26K80-I/SS

• Core Size: 8-Bit
• Program Memory Size: 64KB (32K x 16)
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Number Of I /o: 24
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SSOP (0.200", 5.30mm Width)
• Controller Family/series: PIC18
• Ram Memory Size: 4KB
• Cpu Speed: 16MIPS
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, SPI, USART
• Processor Series: PIC18F26K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 24
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F66K80 FAMILY
REGISTER 27-26: BnSIDL: TX/RX BUFFER ‘n’ STANDARD IDENTIFIER REGISTERS,
REGISTER 27-27: BnSIDL: TX/RX BUFFER ‘n’ STANDARD IDENTIFIER REGISTERS,
DS39977C-page 420
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4
bit 3
bit 2
bit 1-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7-5
bit 4
bit 3
bit 2
bit 1-0
Note 1:
R/W-x
SID2
SID2
R-x
These registers are available in Mode 1 and 2 only.
These registers are available in Mode 1 and 2 only.
SID<2:0>: Standard Identifier bits (if EXID = 0 )
Extended Identifier bits, EID<20:18> (if EXID = 1 ).
SRR: Substitute Remote Transmission Request bit
This bit is always ‘ 1 ’ when EXID = 1 or equal to the value of RXRTRRO (BnCON<5>) when EXID = 0 .
EXIDE: Extended Identifier Enable bit
1 = Received message is an extended identifier frame (SID<10:0> are EID<28:18>)
0 = Received message is a standard identifier frame
Unimplemented: Read as ‘ 0 ’
EID<17:16>: Extended Identifier bits
SID<2:0>: Standard Identifier bits (if EXIDE = 0 )
Extended Identifier bits, EID<20:18> (if EXIDE = 1 ).
Unimplemented: Read as ‘ 0 ’
EXIDE: Extended Identifier Enable bit
1 = Received message is an extended identifier frame (SID<10:0> are EID<28:18>)
0 = Received message is a standard identifier frame
Unimplemented: Read as ‘ 0 ’
EID<17:16>: Extended Identifier bits
R/W-x
SID1
SID1
R-x
LOW BYTE IN RECEIVE MODE [0  n  5, TXnEN (BSEL0<n>) = 0]
LOW BYTE IN RECEIVE MODE [0  n  5, TXnEN (BSEL0<n>) = 1]
W = Writable bit
W = Writable bit
‘1’ = Bit is set
‘1’ = Bit is set
R/W-x
SID0
SID0
R-x
SRR
U-0
R-x
Preliminary
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
EXIDE
EXIDE
R/W-x
R-x
U-0
U-0
—
—
 2011 Microchip Technology Inc.
x = Bit is unknown
x = Bit is unknown
EID17
R/W-x
EID17
R-x
(1)
(1)
EID16
R/W-x
EID16
R-x
bit 0
bit 0