141-0407-012 Emerson Network Power, 141-0407-012 Datasheet - Page 18

• Manufacturer Part Number: 141-0407-012
• Description: CONN PLUG SMA STR CRIMP RG-58/U
• Manufacturer: Emerson Network Power
• Series: SMAr

Specifications of 141-0407-012

• Connector Style: SMA
• Connector Type: Plug, Male Pins
• Contact Termination: Crimp and Solder
• Impedance: 50 Ohm
• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Threaded
• Cable Group: RG-58, 141, 303, LMR-195, Belden 7806A
• Frequency - Max: 12.4GHz
• Frequency-max: 12.4GHz
• Body Style: Straight
• Cable Type: RG 58/U, RG 141, RG 303, LMR 195, HPF 195, RF 195
• Features: Stainless Steel connector
• Frequency Range: 0 GHz to 26.5 GHz
• Housing Material: Stainless Steel
• Mounting Angle: Straight
• Rf Series: SMA
• Product: Various Connectors
• Gender: Male
• Contact Plating: Gold
• Shell Plating: Passivated Stainless Steel
• Termination Style: Crimp
• Maximum Frequency: 26.5 GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: J877

18
SMA Crimp Type Right Angle Plugs
for Flexible Cable
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick braid or
3. Flare braid and slide cable into body making certain that
4. Arrange braid uniformly around crimp stem. Slide crimp
Cable Type
RG-316/U, 161, 174, 188; LMR-100
RG-316 DS, 188 DS
RG-58/U, 141, 303
RG-55/U, 142, 223, 400
center conductor. When stripping LMR-100 low loss cable,
remove foil back to where cable jacket is stripped. A wire
stripper of correct size is recommended for this step.
Twist stranded center conductor into tight bundle and tin
(optional). Slide crimp sleeve onto cable as shown.
the cable insulation bottoms on center contact. Solder
center conductor to contact through the rear access port.
Use a minimum amount of solder for a full fillet joint. .020
(0.51) diameter solder is recommended.
sleeve over braid and crimp securely using recommended
crimp tool. Place expansion cap in access port and seat
with .187 (4.75) diameter flat punch. Shrink heat shrink
tubing over crimp sleeve if applicable.
Stainless Steel SMA Connectors
Part No.
141-0403-102
141-0404-112
141-0407-102
141-0408-102
.151 (3.83)
.213 (5.41)
.213 (5.41)
Crimp Hex
.128 (3.25)
Connectivity....for
Business-Critical Continuity
Inches (Millimeter)