142-1000-003 Emerson Network Power, 142-1000-003 Datasheet - Page 212

• Manufacturer Part Number: 142-1000-003
• Description: CONN HERMETIC SEAL .018" PIN SMA
• Manufacturer: Emerson Network Power
• Series: SMAr

Specifications of 142-1000-003

• Accessory Type: Hermetic Seal
• Features: Feed Through
• Product: Connector
• For Use With/related Products: SMA Connectors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 1421000003; J568

212
Assembly Instructions
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
MMCX Straight Jack for RG-316, RG-316 DS
and RG-179 Size Flexible Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
1. Identify connector parts. (3 piece parts)
2. Strip cable jacket to dimensions shown. Do not nick braid or
3. Assemble contact onto cable.
4. Slide body assembly over contact and under braid, then seat
center conductor during strip operations. Tin center conductor
if contact will be solder attached. Do not tin center conduc-
tor if contact is to be crimp attached. Slide crimp sleeve
onto cable jacket.
Solder attachment: Solder contact to center conductor.
Care should be taken that excess solder is not applied.
Crimp attachment: Crimp contact to center conductor
using Johnson hand tool 140-0000-952 and die set
140-0000-953. Crimp location should be centered between
end of contact and cross-hole. Crimp attachment to solid
center conductor cables is not recommended.
firmly onto contact. The body assembly will “snap” over the
contact barb. The cable may have to be held in a soft jawed
clamping fixture. Slide crimp sleeve forward and crimp using
recommended crimp die hex.
•
RG-316/U, 188, 161, 174
www.EmersonNetworkPower.com/connectivity
CABLE GROUP
188 DS, 187 DS
RG-179/U, 187
RG-316 DS,
135-3303-001
135-3304-001
135-3333-001
PART NO.
CRIMP HEX
.128 (3.25)
.151 (3.83)
.128 (3.25)