GRM43DR61E106KA12L Murata, GRM43DR61E106KA12L Datasheet - Page 129

• Manufacturer Part Number: GRM43DR61E106KA12L
• Description: Multilayer Ceramic Capacitors (MLCC) - SMD/SMT 1812 10uF 25volts X5R 10%
• Manufacturer: Murata
• Series: GRMr

Specifications of GRM43DR61E106KA12L

• Voltage Rating: 25 Volts
• Operating Temperature Range: - 55 C to + 85 C
• Temperature Coefficient / Code: X5R
• Product: General Type MLCCs
• Dimensions: 3.2 mm W x 4.5 mm L x 2 mm H
• Termination Style: SMD/SMT
• Capacitance: 10 uF
• Tolerance: 10 %
• Package / Case: 1812 (4532 metric)
• Dielectric Characteristic: X5R
• Capacitance Tolerance: ± 10%
• Capacitor Case Style: 1812
• Capacitor Mounting: SMD
• Svhc: No
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

!Note
• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our
• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
sales representatives or product engineers before ordering.
!Note
!Note
No.
13
14 Durability
Mounting for testing: The capacitors should be mounted on the substrate as shown below using die bonding. when tests No. 11 to 14 are performed.
GMD Series Specifications and Test Methods (2)
Continued from the preceding page.
High
Temperature
High
Humidity
(Steady)
1. This Specifications and Test Methods is downloaded from the website of Murata Manufacturing co.,ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice.
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
0.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
2. This Specifications and Test Methods has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product
0.
Please check with our sales representatives or product engineers before ordering.
specifications before ordering.
Item
Appearance No defects or abnormalities.
Capacitance
Change
D.F.
I.R.
Appearance No defects or abnormalities.
Capacitance
Change
D.F.
I.R.
R6 : Within 12.5%
R6 : 0.2 max.
More than 12.5 · F
R6 : Within 12.5%
R6 : 0.2 max.
More than 25 · F
Alumina substrate
When no "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (1).
Specifications
Gold land
When "*" is added in PNs table, please refer to GMD Series Specifications and Test Methods (2).
GMD Series Specifications and Test Methods (2)
Gold wire
Apply the rated voltage for 500 12 hours at 40 2 C, in 90 to
95% humidity and set it for 24 2 hours at room temperature,
then measure. The charge/discharge current is less than
50mA.
• Initial measurement
Perform a heat treatment at 150+0/–10 C for one hour and then
let sit for 24 2 hours at room temperature. Perform the initial
measurement.
• Measurement after test
Perform a heat treatment at 150+0/–10 C for one hour and then
let sit for 24 2 hours at room temperature, then measure.
Apply 150%*
maximum operating temperature 3 C. Let sit for 24 2 hours at
room temperature, then measure.
The charge/ discharge current is less than 50mA.
*2 GMD155 R6 1A 274 to 474 are applied to 120%.
• Initial measurement
Perform a heat treatment at 150+0/–10 C for one hour and then
let sit for 24 2 hours at room temperature. Perform the initial
measurement.
• Measurement after test
Perform a heat treatment at 150+0/–10 C for one hour and then
let sit for 24 2 hours at room temperature, then measure.
Alumina substrate
Capacitor
Gold land
Die bond
2
of the rated voltage for 1000 12 hours at the
Test Method
Gold wire
127
C02E.pdf
10.12.20