MCP3550-50-E/SN Microchip Technology, MCP3550-50-E/SN Datasheet - Page 18

• Manufacturer Part Number: MCP3550-50-E/SN
• Description: IC, ADC, 22BIT, 12.5SPS, SOIC-8
• Manufacturer: Microchip Technology

Specifications of MCP3550-50-E/SN

• Resolution (bits): 22bit
• Sampling Rate: 12.5SPS
• Input Channel Type: Differential
• Data Interface: 3-Wire, Serial
• Supply Voltage Range - Analog: 2.7V To 5.5V
• Supply Current: 120µA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

MCP3550/1/3
5.2
During Shutdown mode, on the falling edge of CS, the
conversion process begins. During this process, the
internal oscillator clocks the delta-sigma modulator and
the SINC filter until a conversion is complete. This
conversion time is t
Figure 5-2. At the end of t
settled completely and there is no latency involved with
the digital SINC filter of the MCP3550/1/3.
The two modes of conversion for the MCP3550/1/3
devices are Single Conversion and Continuous
Conversion. In Single Conversion mode, a consecutive
conversion will not automatically begin. Instead, after a
single conversion is complete and all four filters have
settled, the device puts the data into the output register
and enters shutdown.
FIGURE 5-2:
FIGURE 5-3:
DS21950C-page 18
SCK (opt)
SDO/RDY
SDO/RDY
SCK (opt)
Int. Osc
Int. Osc
CS
Controlling Internal Conversions
and the Internal Oscillator
CS
t
CONV
CONV
Single Conversion Mode.
Continuous Conversion Mode.
t
CONV
and the timing is shown in
CONV
, the digital filter has
t
Hi-Z
CONV
Sleep
t
CONV
In Continuous Conversion mode, a consecutive
conversion will be automatic. In this mode, the device
is continuously converting, independent of the serial
interface. The most recent conversion data will always
be available in the Output register.
When the device exits Shutdown, there is an internal
power-up delay that must be observed.
x24
x24
© 2005 Microchip Technology Inc.
Hi-Z
Shutdown
Shutdown
Hi-Z