PIC24FJ192GA106-I/MR Microchip Technology, PIC24FJ192GA106-I/MR Datasheet - Page 5

• Manufacturer Part Number: PIC24FJ192GA106-I/MR
• Description: IC, 16BIT MCU, PIC24F, 32MHZ, QFN-64
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ192GA106-I/MR

• Controller Family/series: PIC24
• No. Of I/o's: 53
• Ram Memory Size: 16KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Core Size: 16 Bit
• Program Memory Size: 192KB
• Peripherals: ADC, Comparator, PWM, RTC, Timer
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, PMP, SPI, UART/USART
• Number Of I /o: 53
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-VFQFN, Exposed Pad
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 53
• Number Of Timers: 5
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240011, DM240001
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARD
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

8. Module: UART (UERIF Interrupt)
9. Module: UART (FIFO Error Flags)
10. Module: SPI (Enhanced Buffer Modes)
 2010 Microchip Technology Inc.
The UART error interrupt may not occur, or occur
at an incorrect time, if multiple errors occur during
a short period of time.
Work around
Read the error flags in the UxSTA register when-
ever a byte is received to verify the error status. In
most cases, these bits will be correct, even if the
UART error interrupt fails to occur. For possible
exceptions, refer to Errata #
Affected Silicon Revisions
Under certain circumstances, the PERR and
FERR error bits may not be correct for all bytes in
the receive FIFO. This has only been observed
when both of the following conditions are met:
• the UART receive interrupt is set to occur when
• more than 2 bytes with an error are received.
In these cases, only the first two bytes with a parity
or framing error will have the corresponding bits
indicate correctly. The error bits will not be set after
this.
Work around
None.
Affected Silicon Revisions
If the SPI event interrupt is configured to occur
when
(SISEL<2:0> = 111), the interrupt may actually
occur when the 7th byte is written to the buffer,
instead of the 8th byte. The other enhanced buffer
interrupts function as previously described.
Work around
Do not use the Full Buffer Interrupt mode. The
SPITBF bit (SPIxSTAT<1>) reliably indicates when
the enhanced FIFO buffer is full, and can be polled
instead of using the Full Buffer Interrupt mode.
Affected Silicon Revisions
A3
A3
A3
X
the FIFO is full or ¾ full 
(UxSTA<7:6> = 1x), and
X
X
A5
A5
A5
the
enhanced
FIFO
9.
buffer
is
PIC24FJ256GA110 FAMILY
full
11. Module: UART (IrDA
12. Module: UART (IrDA)
13. Module: UART (IrDA)
When the UART is operating in 8-bit mode
(PDSEL<1:0> = 0x) and using the IrDA endec
(IREN = 1), the module incorrectly transmits a
data payload of 80h as 00h.
Work around:
None.
Affected Silicon Revisions
When the UART is operating in 8-bit mode
(PDSEL<1:0> = 0x) and using the IrDA endec
(IREN = 1), a framing error may occur when
transmitting a data payload of 00h.
Work around:
None.
Affected Silicon Revisions
When the UART is operating in 9-bit mode
(PDSEL<1:0> = 1x) and using the IrDA endec
(IREN = 1), the module will incorrectly transmit
10 bits when transmitting data payloads of 00h or
80h.
Work around:
None.
Affected Silicon Revisions
A3
A3
A3
X
X
X
A5
A5
A5
®
)
DS80368J-page 5