TA11-A 100-230AC/DC IMO PRECISION CONTROLS, TA11-A 100-230AC/DC Datasheet - Page 2

• Manufacturer Part Number: TA11-A 100-230AC/DC
• Description: TIMER, MULTIFUNCTION, 100-230VAC/DC
• Manufacturer: IMO PRECISION CONTROLS

Specifications of TA11-A 100-230AC/DC

• Contact Configuration: DPDT
• Nom Input Voltage: 230V
• Delay Time Range: 0.05s To 60h
• Adjustment Type: Knob
• Relay Mounting: Plug-In
• Svhc: No SVHC (15-Dec-2010)
• Coil Voltage Vac Nom: 230V
• Contact: RoHS Compliant

Mode selected by turning the screw in the top left hand corner
of the front panel.
CAUTION: Do not touch terminals 5, 6 and 7 while power is
Please see page 109 for timing diagrams
1. On-delay
•
•
•
•
•
•
•
Surface/track mounting – screw terminal
3. One-shot momentary actuation
Wiring diagram and operating modes
Dimensions (mm)
Sockets
Turn the mode selector until PO is displayed.
When power is ON, applying the start signal turns the NO (normally
open) timed contact ON after the set time has elapsed.
For power-on-delay operation, the start signal terminals (2 and 6)
must be connected in advance.
The timer is reset by the removal of power or by applying a reset
signal.
Turn the mode selector until OS is displayed.
When power is ON, applying the start signal instantly turns the NO
timed contact ON and turns it OFF after the set time has elapsed.
Removing power while the timer is in operation or applying a reset
signal resets the timer.
Net weight : Approx. 70g
applied to the timer.
PO
Net weight approx 100g
OS
STD-11
Flush mounting – screw terminal
2. Flicker (Repeat cycle)
•
•
•
•
•
•
Note: For flush mounting, an adaptor CTB is required (sold separately)
Flush mounting – solder terminal
4. Signal off-delay
Net weight : Approx. 45g
Flush mounting
Turn the mode selector until FL is displayed.
When power is ON, applying the start signal turns the timed contact
ON and OFF repeatedly at the set time intervals.
The timer is reset by the removal of power or by applying a reset
signal.
Turn the mode selector until SF is displayed.
When power is ON, applying the start signal instantly turns the NO
timed contact ON. Removing the start signal turns the contact OFF
after the set time has elapsed.
Removing power while the timer is in operation or applying a reset
signal resets the timer.
SF
FL
STF-11
ZSV11
TA11-A