SMU315LP BANNER ENGINEERING, SMU315LP Datasheet - Page 2

• Manufacturer Part Number: SMU315LP
• Description: Photoelectric Sensor
• Manufacturer: BANNER ENGINEERING
• Type: Retroreflectiver

Specifications of SMU315LP

• Output Current: 3A
• Sensor Output: Relay
• Supply Voltage Range Dc: 24V To 240V
• Contact Current Max: 3A
• Switch Terminals: Cable
• Sensing Range Min: 10mm
• Sensor Input: Optical
• Output Type: Relay
• Sensing Range Max: 3m
• Brand/series: Mini-Beam®
• Current, Switching: 3 A
• Function: Proximity
• Indicator: LED
• Ip Rating: IP67
• Light Source: Visible Red LED
• Material, Body: ABS
• Material, Cover: Clear Acrylic
• Material, Lens: Acrylic
• Mounting Type: Panel
• Output: Relay
• Primary Type: Photoelectric
• Range, Measurement: 3 m
• Response Time: 20 ms (Max.)
• Sensing Mode: Polarized Retro-Reflective
• Standards: UL Listed
• Technology: Photoelectric
• Temperature, Operating: -20 to +55 °C
• Termination: Cable
• Voltage, Supply: 240 VAC/VDC
• Voltage, Switching: 250/30 VAC/VDC
• Lead Free Status / Rohs Status: RoHS Exempt Product

Supply Voltage and Current
Supply Protection Circuitry
Output Configuration
Output Rating
Output Protection Circuitry
Output Response Time
Repeatability
24 to 240V ac, 50/60 Hz or
24 to 240V dc (1.5 watts or 2.5 VA maximum)
Protected against transient voltages. DC hookup is without regard to polarity.
SPDT (Single-Pole, Double Throw) (form C) electromechanical relay, ON/OFF output.
Maximum switching power (resistive load): 90W, 250VA
Maximum switching voltage (resistive load): 250V ac or 30V dc
Maximum switching current (resistive load): 3A
Minimum voltage and current: 5V dc, 10 mA
Mechanical life: 20,000,000 operations
Electrical life at full resistive load: 100,000 operations
Protected against false pulse ON power-up.
Closure time: 20 milliseconds max.
Release time: 20 milliseconds max.
Maximum switching speed: 25 operations per second
All sensing modes: 1millisecond
MINI-BEAM
®
Universal Voltage Sensors
Specifications
Adjustments
Indicators
Construction
Environmental Rating
Connections
Operating Conditions
Application Note
Light/Dark Operate select switch
15-turn slotted brass screw Gain (sensitivity) adjustment potentiometer
Located on rear panel, protected by a gasketed, clear acrylic cover (see above)
Patented Alignment Indicator Device system (AID™) lights a rear-panel-mounted LED
indicator whenever the sensor sees a “light” condition. Its pulse rate is proportional to the
light signal strength (the stronger the signal, the faster the pulse rate).
Reinforced thermoplastic polyester housing, totally encapsulated, o-ring seal, acrylic lenses,
and stainless steel screws.
Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 63, 12, and 13; IEC IP67.
PVC-jacketed 5-conductor (2-conductor for emitters) 2 m (6.5') or
9 m (30') unterminated cable.
Temperature: -20° to +55°C (-4° to +131°F)
Maximum relative humidity: 90% at 50°C (non-condensing)
Install transient suppressor (MOV) across contacts switching inductive loads.
Installation
Guide