1566440000 Weidmuller, 1566440000 Datasheet - Page 314

• Manufacturer Part Number: 1566440000
• Description: CONN FMALE DSTV-HD 64 SIZE8 GOLD
• Manufacturer: Weidmuller
• Series: Rockstar® DSTV-HDr

Specifications of 1566440000

• Connector Type: Insert
• Gender: Female
• Number Of Positions: 64+Ground
• Size: 8
• Termination Style: Terminal Block, Curved - Screw
• Voltage Rating: 250V
• Current Rating: 10A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Contact Type: -

H
Cabtite – Cable entry frames
Cabtite KEL
Cabtite KEL
The rectangular panel cutout frames fit exactly into the
standard cutout for heavy-duty connectors.
This makes it possible to accommodate up to 40 connectors
in a very confined space.
• Feeds through prefabricated wiring in confined spaces.
• Two-piece, two-tier system
• Fast and easy mounting
• Standard panel cutout frames for 16- and 24-pole industrial
• The predefined gap achieves a minimum class of protection
• Large numbers of cables in very confined spaces
• Retrofitting of prefabricated wiring also possible
• The manufacturer’s guarantee covering the prefabricated
• Integral strain relief to VDE 0619
• Locknuts ensure that working “overhead” is safe and simple
Cabtite KEL SNAP frame
Snap frame for mounting the cable entry frame in the switchgear
cabinet.
• The KEL can be fitted quickly without tools
• The KEL need not be fitted or removed to add or remove
• The drilling pattern is identical with that of the KEL
• Seals are already integrated on both sides
• Switchgear cabinets can be fitted with KEL SNAP in advance
• KEL SNAP is available for KEL 16 and KEL 24
H.16
plug-in connectors
of IP54
cables remains valid
individual cables
Operating mode
1. The grommet is fitted around
2. Press the grommet with the
3. Assemble the two halves of
4. Finally, the rubber seal is glued
the cable.
Important:
Choose a grommet
with an appropriate clamping
range for the diameter
of the cable!
cable into the open cable entry
frame.
Important:
The flat side of the grommet
must face upwards!
the cable entry frame using the
M5x50 Allen screws supplied.
This achieves integral strain
relief in accordance with VDE
0619 (VDE = German Associa-
tion for Electrical, Electronic
and Information Technologies).
around the cabinet panel
cutout and the cable entry
frame is secured with 4
screws. The cable entry is
now complete, and has a
protection class of IP54!
Advantage: The panel cutout
frames are the same as those
used for heavy-duty connectors.
They are supplied by the switch-
gear cabinet manufacturers.
You do not require a new
punching die!