FC4A-K2C1 IDEC, FC4A-K2C1 Datasheet - Page 2

• Manufacturer Part Number: FC4A-K2C1
• Description: Analog Output Module
• Manufacturer: IDEC

Specifications of FC4A-K2C1

• Supply Voltage: 24VDC
• No. Of Analog Outputs: 2
• Output Voltage Dc Max: 10V
• External Height: 90mm
• Supply Voltage Min: 20.4V
• Operating Voltage Max: 10V
• Operating Voltage Min: -10V
• External Width: 23.25mm
• External Depth: 70mm
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: MicroSmart CPU Module

S
• Read this user’s manual to make sure of correct operation before starting installation, wiring, operation, maintenance, and
• All MicroSmart modules are manufactured under IDEC’s rigorous quality control system, but users must add a backup or
• In this user’s manual, safety precautions are categorized in order of importance to Warning and Caution:
• Turn off the power to the MicroSmart before starting installation, removal, wiring, maintenance, and inspection of the
• Special expertise is required to install, wire, program, and operate the MicroSmart . People without such expertise must not
• Emergency stop and interlocking circuits must be configured outside the MicroSmart . If such a circuit is configured inside
• Install the MicroSmart according to the instructions described in this user’s manual. Improper installation will result in fall-
• The MicroSmart is designed for installation in a cabinet. Do not install the MicroSmart outside a cabinet.
• Install the MicroSmart in environments described in this user’s manual. If the MicroSmart is used in places where the
• The environment for using the MicroSmart is “Pollution degree 2.” Use the MicroSmart in environments of pollution
• Prevent the MicroSmart from falling while moving or transporting the MicroSmart , otherwise damage or malfunction of
• Prevent metal fragments and pieces of wire from dropping inside the MicroSmart housing. Put a cover on the MicroSmart
• Use a power supply of the rated value. Use of a wrong power supply may cause fire hazard.
• Use an IEC 60127-approved fuse on the power line outside the MicroSmart . This is required when equipment containing
• Use an IEC 60127-approved fuse on the output circuit. This is required when equipment containing the MicroSmart is des-
• Use an EU-approved circuit breaker. This is required when equipment containing the MicroSmart is destined for Europe.
• Make sure of safety before starting and stopping the MicroSmart or when operating the MicroSmart to force outputs on or
• If relays or transistors in the MicroSmart output modules should fail, outputs may remain on or off. For output signals
• Do not connect the ground wire directly to the MicroSmart . Connect a protective ground to the cabinet containing the
• Do not disassemble, repair, or modify the MicroSmart modules.
• When disposing of the MicroSmart , do so as an industrial waste.
inspection of the FC4A series MicroSmart analog I/O modules
failsafe provision to the control system using the MicroSmart in applications where heavy damage or personal injury may
be caused in case the MicroSmart should fail.
MicroSmart
use the MicroSmart .
the MicroSmart , failure of the MicroSmart may cause disorder of the control system, damage, or accidents.
ing, failure, or malfunction of the MicroSmart .
MicroSmart
excessive shocks, then electrical shocks, fire hazard, or malfunction will result.
degree 2 (according to IEC 60664-1).
the MicroSmart will result.
modules during installation and wiring. Ingress of such fragments and chips may cause fire hazard, damage, or malfunc-
tion.
the MicroSmart is destined for Europe.
tined for Europe.
off. Incorrect operation on the MicroSmart may cause machine damage or accidents.
which may cause heavy accidents, provide a monitor circuit outside the MicroSmart .
MicroSmart
Europe.
AFETY
. Failure to turn power off may cause electrical shocks or fire hazard.
is subjected to high-temperature, high-humidity, condensation, corrosive gases, excessive vibrations, and
using an M4 or larger screw. This is required when equipment containing the MicroSmart is destined for
Warning
Caution
P
RECAUTIONS
FC4A M
Warning notices are used to emphasize that improper operation may cause
severe personal injury or death.
Caution notices are used where inattention might cause personal injury or
damage to equipment.
ICRO
S
MART
A
NALOG
I/O M
.
ODULE
U
SER
’
S
M
ANUAL
P
REFACE
-1