CV500-MC421 Omron, CV500-MC421 Datasheet - Page 15

• Manufacturer Part Number: CV500-MC421
• Description: SERVO CONTROL MODULE
• Manufacturer: Omron

Specifications of CV500-MC421

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2-1
Follow these procedures if your hard disk is the C drive and your floppy disk drive is the A drive.
1. Power
2. Create a Directory
3. Access a Directory
4. Copy the Computer Monitor Software
5. Edit AUTOEXEC. BAT to Enable the Mouse
6. End of Procedures
Before Installation
Installation Procedures












If the hard disk has not been formatted yet, format the hard disk using either IBM DOS Ver. 3.30 or
higher, or MS-DOS Ver. 3.30 or higher. If, however, some applications have already been installed
on the IBM PC/AT or compatible, this means that the formatting has already been done. In this
case, do not format. Otherwise, applications will be erased.
Turn the IBM PC/AT or compatible on.
A DOS prompt such as
starts, exit the program to return to DOS.
Create the directory for the Computer Monitor Software installation. If, for example, a directory
named USD is to be created, type the following:
Type the following to access the directory where the Computer Monitor Software is to be installed:
Insert the floppy disk containing the Computer Monitor Software into drive A.
Type the following:
All the files will be copied into the USD directory.
When the copying is complete, eject the floppy disk from the IBM PC/AT or compatible. Store this
floppy disk in a safe place as this is no longer needed for the installation procedures.
Start your word processor or editor, and read AUTOEXEC. BAT in the root directory.
To enable the mouse, add the following command, if not already added:
The above procedures ensure the installation of the Computer Monitor Software.
Install the Menu Program as necessary (refer to the Menu Program Manual). Remember that the
start command for the Computer Monitor Software is UMON.
The prompt
This chapter provides instructions for installing the OMNUC U-series Computer Monitor
Software on an IBM PC/AT or compatible’s hard disk.
Installation on a IBM PC/AT or Compatible




 
   




 
 

 
will appear on the screen.


should appear on the screen. If the Menu Program automatically
Chapter 2