ZEN10C1DTDV1 Omron, ZEN10C1DTDV1 Datasheet - Page 13

• Manufacturer Part Number: ZEN10C1DTDV1
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of ZEN10C1DTDV1

• Peak Reflow Compatible (260 C): No
• Signal Input Type: 24 VDC
• Output Type: Transistor
• Supply Voltage: 24VDC
• Supply Voltage Max: 24VDC
• No. Of Digital Inputs: 6
• Mounting Type: DIN Rail/ Bolt-on
• No. Of Digital Outputs: 4
• Rohs Compliant: No
• Approval Categories: UL, CE
• Leaded Process Compatible: No
• For Use With: ZEN Series Logic Controllers
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Units with DC Power Supply
Note: 1. Be sure to connect the COM terminal before turning ON the power supply. If the COM terminal is disconnected, or if the wiring is changed
CPU Units with 10 I/O Points
For Connections to Negative ( ) Common (PNP Connection)
For Connecting Analog Input Devices to Input Terminals I4 and I5
For Connections to Positive (+) Common (NPN Connection)
Note: When connecting an analog input device, always connect the negative side to the COM terminal.
Note: When connected to the positive (+) common, I4 and I5 cannot be used as analog inputs.
2. Apply the power supply voltage through a relay or switch in such a way that the voltage reaches the rated value within 4 s. If the voltage
12 to 24 VDC
12 to 24 VDC
12 to 24 VDC
after turning ON the power supply, a malfunction may occur.
is applied gradually, the power may not be reset or unstable output operations may result.
+
CPU Unit with 10 I/O points
CPU Unit with 10 I/O points
CPU Unit with 10 I/O points
COM
COM
COM
I 0
I0
I1
I1
I2
I2
I3
I3
I4
I4
I5
I5
Input device
Input
device
Programmable Relay
ZEN V2 Units
13