166736-006 VEEDER ROOT, 166736-006 Datasheet - Page 174

• Manufacturer Part Number: 166736-006
• Description: Totalizer Display Panel
• Manufacturer: VEEDER ROOT

Specifications of 166736-006

• No. Of Digits / Alpha: 6
• Digit Height: 8.8mm
• Mounting Type: Base
• Lead Free Status / RoHS Status: na

R
E
L
E
C
T
C
I
6
M
T
E
R
S
I
OPERATION
A cycle progress pointer oscillates between the ON and OFF time
setpoints. As this pointer crosses the zero point on the dial, two internal
10 amp SPDT output switches transfer. The transfer point of the output
switches is adjustable to allow a make before break (overlap) or a break
before make (dwell) switch action. The overlap or dwell time interval is
limited to 1.5% of the total (ON plus OFF) time cycle.
A synchronous unidirectional motor drives the unit through precision
gearing. Instant reversing of the progress pointer is accomplished by
positive mechanical action.
SPECIFICATIONS
Time Ranges:
6.16
The HG1 is an ON-OFF repeat cycle timer engineered with the same
features as the rest of the plug-in CYCL-FLEX
Also see Series CX
in Section 5 for
Solid-State Model
Repeat cycle, two circuit timer housed in CYCL-FLEX
Separate dial scale for ON time and OFF time
Individually adjustable ON and OFF time intervals via concentric
knobs on front of unit
Combination of ON and OFF time equals total time cycle of unit
EAGLE SIGNAL
Electric Timers
VEEDER-ROOT • EAGLE SIGNAL • DYNAPAR
Sym.
00
01
02
03
04
05
06
07
08
09
10
150 Sec.
150 Min.
Range
30 Sec.
60 Sec.
10 Min.
30 Min.
60 Min.
5 Min.
10 Hr.
30 Hr.
Dial
5 Hr.
Minimum
Setting
10 Sec.
30 Sec.
10 Min.
30 Min.
.5 Sec.
1 Sec,
2 Sec.
5 Sec.
1 Min.
2 Min.
5 Min.
®
brand
Max. Dwell
or Overlap
family.
10 Sec.
30 Sec.
10 Min.
30 Min.
.5 Sec.
1 Sec.
2 Sec.
5 Sec.
1 Min.
2 Min.
5 Min.
®
plug-in case
HG1 FLEXOPULSE
Voltage/Frequency: 120V, 60 Hz
Burden: 2.5 VA @ 120V AC
Output Rating: 10 amp 120 VAC, 5 amp 240 VAC Resistive
Repeat Accuracy: 1/2 of 1% of dial
Temperature Range: -20° to 140°F
Agency Approvals: UL Recognition E61735
OPERATION
To Set
240V, 60 Hz
Mechanical Life: 10,000,000 operations
Switch Life: 250,000 under 10 amp, 120 VAC resistive load
1,000,000 under 5 amp, 120 VAC resistive load
CSA Certification LR26861
RoHS
Move the black pointer to the desired OFF setting and the orange pointer
to the desired ON setting (as shown in Figure 1). The sum of these ON
and OFF intervals cannot exceed the total time of one scale. Switch
contacts are tripped open or closed each time the indicator pointer
passes 0. When the indicator pointer is in the OFF scale to the left of 0
contacts 4-3 and contacts 6-8 are closed and 4-5 and 6-7 are open.
When the indicator pointer is in the ON scale to the right side of 0
contacts 4-5 and 6-7 are closed and 4-3 and 6-8 are open. The indicator
pointer must travel to the preset limit and back to 0 to complete the total
ON or OFF interval. The two switches can operate together or be set to
allow a break before make (dwell) interval or make before break
(overlap) between ON-OFF switching. Refer to the standard time range
chart under specifications for the maximum dwell or overlap interval for
each time range. Figure 2 illustrates the path of the indicator pointer and
the switch action each time the zero point is passed. Figure 3 illustrates
the terminal location on the rear of the unit case.
Repeat cycle timer
features separate dial
scales for ON and
OFF time
®
Repeat Cycle Timer
®
RECOGNIZED
CERTIFIED
®