8804-0000 REDINGTON COUNTERS, 8804-0000 Datasheet - Page 2

• Manufacturer Part Number: 8804-0000
• Description: LCD Preset Counter
• Manufacturer: REDINGTON COUNTERS

Specifications of 8804-0000

• No. Of Digits / Alpha: 8
• Digit Height: 9mm
• Power Consumption: 6VA
• Counting Speed: 40kHz
• Operating Temperature Range: -20°C To +60°C
• Peak Reflow Compatible (260 C): No
• Signal Input Type: 0 To 10VDC
• Leaded Process Compatible: No
• Panel Cutout Height: 41.1mm
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Max. Count Rate: 40 KHz for single counter mode.
Reset Functions:
RS232/RS485/RS422 Serial Communications: (Optional)
Certifications & Compliances:
Environmental Conditions:
Ordering Information
ACCESSORIES
200557-002S AC Voltage module,
Note:
* All parts are normally in factory stock.
Dimensions
Applications
86
MODEL
NUMBER
8803-0000 Base unit, Red Trans., 10-30VDC, Prescale
8813-0000 Base unit, Reflective, 10-30VDC, Prescale
8803-0100 Red Trans., 10-30VDC, Prescale, Serial Communications
8813-0100 Reflective, 10-30VDC, Prescale, Serial Communications
Baud Rate:
Data Length/Parity/Stop Bits:
RS485 Address:
Transceiver Loading:
Operating Temperature:
Storage Temperature:
Reflective display is recommended for applications that will be exposed to direct sunlight
Flow meter
Model 88
DESCRIPTION
UL, cUL- Recognized Component, file # E 195514
CE-Compliant to EN 61326: 1998 for industrial equipment
20 KHz for dual count modes.
Manual and remote.
2.59 [65.8]
Selectable 2400, 4800, 9600, or 19.2K
8n1
Programmable from 0 to 99.
RS232/RS485/RS422- up to 16 loads
-4°F to +140°F [-20°C to +60°C]
-40°F to +185°F [-40°C to +85°C]
+90VAC to +250VAC also outputs +12VDC for base unit & sensor
Panel builders
3.21 [81.7]
www.redingtoncounters.com
0.13 [3.2]
Electronic
4.33 [109.9]
Model 88 Totalizer
Panel Cutout 2.63’’ to 2.605’’ x 1.28’’ to 1.26’’ [66.8 to 66.2 x 32.5 to 32.0]
Piece count
1.25 [31.8]
Electrical Connection:
Construction:
Panel Thickness: 0.05” to 0.20” [1.3 to 5.1mm]
Weight:
Operating & Storage Humidity: to 95% (non-condensing) from -4°F
Altitude:
Max. thickness of panel 0.5’’ [12.7]
DISPLAY
RED
TRANSMISSIVE
X
X
High impact black plastic case with “Clip” type mount.
Front panel meets NEMA 4X/IP65 requirements for
indoors use, when properly installed. Oversized front
panel flange insures proper sealing of panel cutouts.
Gaskets for front panel are provided.
Less than 3 oz. (85g)
2.96 [75.2]
LCD Programmable Totalizer
Secondary equipment
DISPLAY
REFLECTIVE INPUT
X
X
Wire clamping screw terminals
to +140°F [-20°C to +60°C]
Up to 6561Ft. (2000 Meters)
1.62 [41.1]
ANALOG
ANALOG RS-485
OUTPUT
Test equipment
RS-232
RS 422
X
X