CUB4LP40 Red Lion Controls, CUB4LP40 Datasheet

no-image

CUB4LP40

Manufacturer Part Number
CUB4LP40
Description
CUB4LP BACKLIGHT, RED
Manufacturer
Red Lion Controls
Datasheet

Specifications of CUB4LP40

Rohs Compliant
NA
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
MODEL CUB4LP - LOOP POWERED PROCESS INDICATOR
MODEL CUB4CL - CURRENT LOOP INDICATOR
DESCRIPTION
CUB4LP uses a 4 to 20 mA or a 10 to 50 mA input signal as operating power.
The input signal is also used to power the backlighting on the CUB4LP40 unit.
The CUB4CL uses a 4 to 20 mA or a 10 to 50 mA input signal to power the unit.
An external power supply is used to power the CUB4CL backlighting to provide
a brighter, more consistent display and a lower compliance voltage.
a DIP switch selectable decimal point. The CUB4LP display is available in
positive image reflective (dark digits, reflective background) or positive image
transflective (dark digits, illuminated background) with red backlighting. The
CUB4CL display is available in positive image transflective (dark digits,
illuminated background) with red or yellow/green backlighting or negative
image transmissive (illuminated digits, dark background) with red or
yellow/green backlighting.
measurement such as temperature, pressure, humidity, fluid flow, etc. The unit
is calibrated at the factory with 0.0 displayed @ 4 mA input and 100.0 displayed
@ 20 mA input.
viewing window. When properly installed, the sealed front panel meets NEMA
4X/IP65 specifications for wash-down and dusty environments.
DIMENSIONS In inches (mm)
The CUB4LP and CUB4CL are additions to the CUB4 product line. The
The units have a 3½-digit LCD display with 0.6" (15.2 mm) high digits and
The ability to scale the display allows indication in any desired unit of
The units are contained in a lightweight, high impact plastic case with a clear
FOR USE IN HAZARDOUS LOCATIONS:
Class I, Division 2, Groups A, B, C, and D
Class II, Division 2, Groups F and G
Class III, Division 2
installation and operation of the unit.
Read complete instructions prior to
CAUTION: Risk of Danger.
Note: Recommended minimum clearance (behind the panel) for
mounting clip installation is 2.15" (54.6) H x 3.00" (76.2) W.
1
SAFETY SUMMARY
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
SPECIFICATIONS
1. DISPLAY: 3½-digit (-1999 to 1999), 0.6" (15.2 mm) high digits.
2. EXTERNAL BACKLIGHT POWER: (CUB4CL only)
3. DECIMAL POINTS: Three DIP switch selectable, decimal point positions
All safety related regulations, local codes and instructions that appear in the
The CUB4LP is available with a positive image reflective LCD or a red
backlit positive image transflective LCD. The intensity of the backlighting
will vary with the input signal.
The CUB4CL is available with a positive image transflective LCD with red
or yellow/green backlighting or a negative image transmissive with red or
yellow/green backlight.
A minus sign is displayed when the indicator is adjusted for a negative offset.
Overrange: Overrange is indicated by a “1” in the most significant digit and
9 - 28 VDC, @ 35 mA typ., 50 mA max. Power Supplies must be Class 2
(NEC) or SELV rated. Above 26 VDC, derate the operating temperature to
50°C.
allow the display to be read in tenths, hundredths or thousandths.
OR POSITIVE IMAGE REFLECTIVE LCD (CUB4LP)
OR NEGATIVE IMAGE TRANSMISSIVE WITH RED OR
YELLOW/GREEN BACKLIGHT (CUB4CL)
DUAL RANGE, 4 to 20 mA OR 10 to 50 mA
3½-DIGIT, 0.6" (15.2 mm) HIGH DIGITS
POSITIVE IMAGE TRANSFLECTIVE LCD WITH RED BACKLIGHT
POSITIVE IMAGE TRANSFLECTIVE LCD WITH RED BACKLIGHT
SPAN AND OFFSET CAPABILITY
NEGATIVE AND OVERRANGE INDICATION
SELECTABLE DECIMAL POINT POSITION
NEMA 4X/IP65 SEALED FRONT PANEL BEZEL
FITS DIN STANDARD CUT-OUT 2.68" (68 mm) X 1.30" (33 mm)
the blanking of the three least significant digits.
WARNING - EXPLOSION HAZARD - SUBSTITUTION
OF COMPONENTS MAY IMPAIR SUITABILITY FOR
CLASS I, DIVISION 2 / CLASS II, DIVISION 2 / CLASS III, DIVISION 2
Bulletin No. CUB4LP-L
Drawing No. LP0318
Released 4/08

Related parts for CUB4LP40

CUB4LP40 Summary of contents

Page 1

... The CUB4LP and CUB4CL are additions to the CUB4 product line. The CUB4LP uses input signal as operating power. The input signal is also used to power the backlighting on the CUB4LP40 unit. The CUB4CL uses input signal to power the unit. An external power supply is used to power the CUB4CL backlighting to provide a brighter, more consistent display and a lower compliance voltage. The units have a 3½ ...

Page 2

... SPECIFICATIONS (Cont’d) 4. MAXIMUM VOLTAGE DROP: 3.2 VDC for CUB4LP00 4.0 VDC for CUB4LP40 3.2 VDC for CUB4CL all models 5. EQUIVALENT RESISTANCE: CUB4LP00: 800 Ω max mA; 160 Ω max 320 Ω max mA; 65 Ω max CUB4LP40: 1000 Ω max mA; 200 Ω ...

Page 3

EMC INSTALLATION GUIDELINES Although this unit is designed with a high degree of immunity to ElectroMagnetic Interference (EMI), proper installation and wiring methods must be followed to ensure compatibility in each application. The type of the electrical noise, source or ...

Page 4

... Red Lion Controls BV Printerweg 3821 AD Amersfoort Tel +31 (0) 334 723 225 Fax +31 (0) 334 893 793 DESCRIPTION PART NUMBERS CUB4LP00 *CUB4LP40 CUB4CL10 CUB4CL20 CUB4CL30 CUB4CL40 MLPS1000 Red Lion Controls AP Unit 101, XinAn Plaza Building 13, No.99 Tianzhou Road ShangHai, P ...

Related keywords